{
  "id": "boiling-point-elevation",
  "title": "Boiling-Point Elevation",
  "lang": "en",
  "source_lang": "en",
  "summary": "Boiling-point elevation is the increase in a solvent’s boiling temperature caused by a dissolved nonvolatile solute, approximately proportional to solute particle concentration in dilute solutions.",
  "category": "science",
  "subcategory": "chemistry",
  "type": "concept",
  "aliases": [
    "Ebullioscopic effect",
    "Elevation of boiling point"
  ],
  "generated_at": "2026-11-05",
  "model": "pro/gpt-6.1-sol",
  "url": "https://aiwiki.page/en/boiling-point-elevation/",
  "translations": {
    "zh-Hans": {
      "url": "https://aiwiki.page/zh/boiling-point-elevation/",
      "json": "https://aiwiki.page/zh/boiling-point-elevation.json"
    }
  },
  "sections": [
    {
      "heading": "",
      "text": "Boiling-point elevation is the increase in the boiling point of a solvent when a nonvolatile solute is dissolved in it, compared with the pure solvent at the same external pressure. In dilute solutions, it is a colligative property: its magnitude depends primarily on the number of dissolved particles relative to the amount of solvent, rather than on the particles’ chemical identity. The effect underlies a method of measuring molar mass and is important in the processing of concentrated solutions."
    },
    {
      "heading": "Physical basis",
      "text": "A liquid boils when its equilibrium vapor pressure reaches the surrounding pressure. Dissolving a nonvolatile substance generally lowers the solvent’s vapor pressure at a given temperature. Consequently, the solution must be heated to a higher temperature before its vapor pressure reaches the same external pressure.\n\nFor an ideal solution containing a nonvolatile solute, Raoult’s law gives\n\n\\[p_1=x_1p_1^\\ast,\\]\n\nwhere \\(p_1\\) is the solvent’s partial vapor pressure above the solution, \\(x_1\\) is its mole fraction in the liquid, and \\(p_1^\\ast\\) is the vapor pressure of the pure solvent at the same temperature. Because \\(x_1<1\\), the solution has a lower vapor pressure than the pure solvent.\n\nA more general explanation uses chemical potential. Mixing lowers the chemical potential of the liquid solvent relative to its pure state. At fixed pressure, the temperature at which the solvent’s liquid and vapor chemical potentials become equal is therefore shifted upward. This is an equilibrium effect, not simply a mechanical obstruction of escaping molecules by solute particles.\n\nThe comparison must be made at the same pressure. A boiling-temperature increase caused by pressurizing a liquid, as in a pressure cooker, is distinct from boiling-point elevation caused by a dissolved solute."
    },
    {
      "heading": "Dilute-solution law",
      "text": "For a sufficiently dilute solution,\n\n\\[\\Delta T_b=T_b-T_b^\\ast \\approx iK_bm,\\]\n\nwhere:\n\n- \\(T_b\\) is the solution’s boiling temperature;\n- \\(T_b^\\ast\\) is the pure solvent’s boiling temperature at the same pressure;\n- \\(K_b\\) is the solvent’s ebullioscopic constant, or molal boiling-point elevation constant;\n- \\(m\\) is the molality of the solute, measured in moles per kilogram of solvent;\n- \\(i\\) is the van ’t Hoff factor, accounting for the effective number of dissolved particles produced per solute formula unit.\n\nA temperature difference has the same numerical value in kelvins and degrees Celsius. When molality is expressed in \\(\\mathrm{mol\\,kg^{-1}}\\), the units of \\(K_b\\) are \\(\\mathrm{K\\,kg\\,mol^{-1}}\\).\n\nMolality uses the mass of the solvent, not the mass of the entire solution. It is also distinct from molar concentration, which measures amount of solute per volume of solution and can change as the solution expands with temperature.\n\nFor a dilute mixture of independently behaving solutes, the elevations are approximately additive:\n\n\\[\\Delta T_b\\approx K_b\\sum_j i_jm_j.\\]\n\nThe ebullioscopic constant\n\nIn the dilute limit, with an approximately ideal vapor and negligible pressure corrections,\n\n\\[K_b=\\frac{R(T_b^\\ast)^2M_1}{\\Delta_{\\mathrm{vap}}H_1},\\]\n\nwhere \\(R\\) is the gas constant, \\(M_1\\) is the solvent’s molar mass in \\(\\mathrm{kg\\,mol^{-1}}\\), and \\(\\Delta_{\\mathrm{vap}}H_1\\) is its molar enthalpy of vaporization near the boiling temperature.\n\nThe constant therefore depends on the solvent and, through its boiling temperature and vaporization properties, on pressure. For water near its normal boiling point at one standard atmosphere,\n\n\\[K_b\\approx0.512\\ \\mathrm{K\\,kg\\,mol^{-1}}.\\]"
    },
    {
      "heading": "Thermodynamic derivation",
      "text": "The chemical potential of a solvent in a liquid solution can be written as\n\n\\[\\mu_1^{(l)}=\\mu_1^{(l,\\ast)}+RT\\ln a_1,\\]\n\nwhere \\(a_1\\) is the solvent’s thermodynamic activity, referenced to pure liquid solvent at the same temperature and pressure.\n\nAt the solution’s boiling point, the liquid and vapor solvent chemical potentials are equal. For a nonvolatile solute, the vapor is essentially pure solvent. Expanding the pure-solvent chemical-potential difference about \\(T_b^\\ast\\) gives, to first order,\n\n\\[\\Delta T_b\\approx -\\frac{R(T_b^\\ast)^2}{\\Delta_{\\mathrm{vap}}H_1}\\ln a_1.\\]\n\nFor an ideal solution, \\(a_1=x_1\\). In a dilute solution of a nondissociating solute,\n\n\\[-\\ln x_1\\approx x_2\\approx mM_1,\\]\n\nwhere \\(x_2\\) is the solute mole fraction. Substitution yields \\(\\Delta T_b\\approx K_bm\\).\n\nThis derivation explains both the approximate dependence on particle concentration and the limitations of the linear law: outside the dilute ideal regime, solvent activity need not follow mole fraction closely."
    },
    {
      "heading": "Electrolytes and particle number",
      "text": "A dissolved nonelectrolyte that remains as separate molecules has \\(i\\approx1\\). An electrolyte may produce multiple ions per formula unit. In the ideal, fully dissociated limit:\n\n- sodium chloride produces two ions, giving \\(i\\rightarrow2\\);\n- calcium chloride produces three ions, giving \\(i\\rightarrow3\\).\n\nThese limiting values are not exact predictions for solutions at arbitrary concentrations. Interactions between ions, ion pairing, and incomplete dissociation can alter the observed colligative effect. Conversely, solute molecules that associate into dimers or larger aggregates can produce an apparent factor below one.\n\nFor real electrolyte solutions, treating \\(i\\) solely as a count of independently moving ions is an approximation. More accurate descriptions use solvent activity or an osmotic coefficient to account for nonideal interactions."
    },
    {
      "heading": "Examples",
      "text": "A molecular solute\n\nConsider \\(0.100\\) mol of a nonvolatile, nondissociating solute dissolved in \\(1.00\\) kg of water. Its molality is \\(0.100\\ \\mathrm{mol\\,kg^{-1}}\\), so\n\n\\[\\Delta T_b\\approx (1)(0.512)(0.100)\\ \\mathrm{K} =0.0512\\ \\mathrm{K}.\\]\n\nThe boiling temperature rises by only about \\(0.05\\ ^\\circ\\mathrm{C}\\). This illustrates why small quantities of dissolved sugar or salt produce only modest changes in water’s boiling temperature.\n\nAn electrolyte\n\nFor a \\(0.100\\ \\mathrm{mol\\,kg^{-1}}\\) sodium chloride solution, assuming ideal dissociation,\n\n\\[\\Delta T_b\\approx (2)(0.512)(0.100)\\ \\mathrm{K} =0.1024\\ \\mathrm{K}.\\]\n\nThis is an ideal estimate, not an exact measured value; nonideal behavior changes the result."
    },
    {
      "heading": "Measurement and applications",
      "text": "Ebullioscopy is the measurement of boiling-point elevation, traditionally used to determine the molar mass of a dissolved substance. For a nonvolatile, nondissociating solute,\n\n\\[M_2\\approx \\frac{K_bw_2}{\\Delta T_bw_1},\\]\n\nwhere \\(w_2\\) is the solute mass in grams, \\(w_1\\) is the solvent mass in kilograms, and \\(M_2\\) is obtained in \\(\\mathrm{g\\,mol^{-1}}\\).\n\nAccurate measurements require control of external pressure, solvent loss, composition, and measurement uncertainty. Association or dissociation of the solute changes the apparent molar mass unless explicitly accounted for.\n\nIn industrial evaporation and solution concentration, boiling-point elevation affects operating temperatures and the temperature difference available for transferring heat. It matters in processes such as concentrating sugar solutions and brines. At high concentrations, measured property data or suitable thermodynamic models are generally more reliable than the dilute-solution formula."
    },
    {
      "heading": "Limits and related phenomena",
      "text": "The simple law assumes a dilute solution, a solute with negligible vapor pressure, and no unaccounted-for chemical changes. Several situations require additional treatment:\n\n- Concentrated solutions: solvent activity and intermolecular interactions make the elevation nonlinear in molality.\n- Volatile solutes: both components contribute to vapor pressure. The mixture may boil above or below the pure solvent’s boiling temperature and may form an azeotrope.\n- Changing composition: during open boiling, solvent escapes and a nonvolatile solute becomes more concentrated, so the boiling temperature may rise over time.\n- Nonequilibrium effects: superheating and delayed bubble formation can produce observed temperatures different from the equilibrium boiling point.\n- Suspensions: undissolved particles do not contribute to the elevation in the same way as dissolved molecules or ions.\n\nBoiling-point elevation is closely related to freezing-point depression, vapor-pressure lowering, and osmotic pressure associated with osmosis. All reflect changes in solvent chemical potential caused by mixing, although each is observed through a different equilibrium condition."
    }
  ],
  "links": [
    "solvent",
    "pressure",
    "molar-mass",
    "vapor-pressure",
    "temperature",
    "raoults-law",
    "chemical-potential",
    "molality",
    "kelvin",
    "molar-concentration",
    "gas-constant",
    "enthalpy",
    "water",
    "thermodynamic-activity",
    "electrolyte",
    "ion",
    "measurement-uncertainty",
    "heat",
    "azeotrope",
    "freezing-point-depression",
    "osmosis"
  ],
  "sources": [],
  "license": "https://creativecommons.org/licenses/by/4.0/"
}