{
  "id": "bioorthogonal-chemistry",
  "title": "Bioorthogonal Chemistry",
  "lang": "en",
  "source_lang": "en",
  "summary": "Bioorthogonal chemistry develops selective reactions that operate in biological environments without substantially interfering with native biochemical processes.",
  "category": "science",
  "subcategory": "chemistry",
  "type": "concept",
  "aliases": [
    "Bioorthogonal chemical ligation",
    "Bioorthogonal ligation"
  ],
  "generated_at": "2026-11-03",
  "model": "pro/gpt-6.1-sol",
  "url": "https://aiwiki.page/en/bioorthogonal-chemistry/",
  "translations": {
    "zh-Hans": {
      "url": "https://aiwiki.page/zh/bioorthogonal-chemistry/",
      "json": "https://aiwiki.page/zh/bioorthogonal-chemistry.json"
    }
  },
  "sections": [
    {
      "heading": "",
      "text": "Bioorthogonal chemistry is the study and application of chemical reactions that can occur within biological systems while remaining substantially unreactive toward their native components. Typically, two deliberately introduced functional groups react selectively with one another to form a covalent bond, allowing a biomolecule to be labeled, tracked, captured, assembled, or chemically activated. The term describes a relationship between a reaction and its biological environment: a transformation that is bioorthogonal on a purified protein is not necessarily suitable inside a living cell or animal.\n\nThe field addresses a central difficulty in chemical biology. Living systems contain many chemically similar molecules, often at concentrations far greater than that of the intended target, and their functions depend on maintaining tightly controlled conditions. Bioorthogonal reactions provide chemical selectivity that complements the recognition capabilities of enzymes, antibodies, and nucleic acids. They have made otherwise inaccessible features of glycosylation, protein synthesis, lipid trafficking, and molecular interactions experimentally observable.\n\nMajor reaction families include the Staudinger ligation, copper-catalyzed and strain-promoted azide–alkyne cycloadditions, and tetrazine ligations. Their usefulness depends not only on bond formation but also on how reactive groups are installed, how rapidly reagents reach their targets, and whether the resulting measurement faithfully represents the underlying biology."
    },
    {
      "heading": "Historical development and relationship to click chemistry",
      "text": "Bioorthogonal chemistry emerged from efforts to study biological molecules that were difficult to label genetically. Fluorescent proteins could be fused to many proteins, but this strategy did not directly address carbohydrates, lipids, or the numerous small chemical modifications assembled by cellular metabolism. Glycans were especially challenging because their structures are produced through networks of enzymes rather than copied directly from a nucleic-acid template. A small chemical handle incorporated into a sugar offered a way to mark these molecules without initially attaching a bulky reporter.\n\nA decisive advance came in 2000, when Eliana Saxon and Carolyn Bertozzi reported the Staudinger ligation. Their reaction adapted the classical reaction between an organic azide and a phosphine so that it produced a stable covalent linkage rather than simply reducing the azide to an amine. Azide-bearing sugars could be processed by cells and subsequently detected with a complementary phosphine reagent. Bertozzi introduced the term “bioorthogonal” in 2003 to describe chemical transformations compatible with biological systems.\n\nA related development was click chemistry, formulated by K. Barry Sharpless and collaborators as an approach favoring modular, reliable, high-yielding reactions with broadly useful building blocks. In 2002, groups led independently by Morten Meldal and by Sharpless and Valery Fokin reported the copper(I)-catalyzed azide–alkyne cycloaddition. This transformation became a central click reaction because it reliably joined azides and terminal alkynes under mild conditions. However, the presence of copper complicated its direct use in living systems.\n\nIn 2004, Nicholas Agard, Jennifer Prescher, and Bertozzi demonstrated a copper-free, strain-promoted azide–alkyne cycloaddition using a cyclooctyne. This established that stored molecular strain could provide sufficient reactivity without adding a metal catalyst. Further expansion came in 2008, when studies including those by Melissa Blackman, Maksim Royzen, and Joseph Fox established highly rapid tetrazine–trans-cyclooctene ligation; related work by other groups helped establish tetrazine chemistry as a major biological labeling platform.\n\nClick chemistry and bioorthogonal chemistry consequently overlap but are not synonyms. A click reaction can be excellent for synthetic assembly while being unsuitable for a living cell. Conversely, a useful bioorthogonal transformation may be designed for a narrow biological task rather than broad synthetic generality. The 2022 Nobel Prize in Chemistry recognized Bertozzi, Meldal, and Sharpless “for the development of click chemistry and bioorthogonal chemistry,” reflecting the complementary contributions of these two approaches."
    },
    {
      "heading": "Chemical selectivity, kinetics, and biological compatibility",
      "text": "A bioorthogonal reaction must compete successfully with a chemically crowded environment. Cellular proteins contain amines, carboxylates, alcohols, thiols, and other functional groups; nucleic acids, sugars, and metabolites add further potential reaction partners. Conventional electrophiles that readily label native nucleophiles therefore do not automatically qualify as bioorthogonal reagents. The usual strategy is to introduce a functional group, such as an azide or tetrazine, whose complementary reactivity is largely absent from the biological system under investigation.\n\nSelectivity alone is insufficient. The reaction must also proceed on a useful timescale at the concentrations that biology permits. For a simple irreversible bimolecular ligation,\n\n\\[A+B \\xrightarrow{k_2} P, \\qquad v=k_2[A][B],\\]\n\nwhere \\(k_2\\) is the second-order rate constant. If reagent \\(B\\) is present in sufficient excess that its concentration remains approximately constant, the reaction becomes pseudo-first-order, with\n\n\\[k_{\\mathrm{obs}}=k_2[B], \\qquad t_{1/2}=\\frac{\\ln 2}{k_2[B]}.\\]\n\nThese relationships explain why apparently modest differences in chemical kinetics can determine whether a labeling strategy succeeds. At a constant reagent concentration of \\(1\\,\\mu\\mathrm{M}\\), a reaction with \\(k_2=1\\,\\mathrm{M^{-1}\\,s^{-1}}\\) has an idealized labeling half-time of about eight days. Increasing \\(k_2\\) to \\(10^4\\,\\mathrm{M^{-1}\\,s^{-1}}\\) reduces that half-time to about 69 seconds. These calculations assume a homogeneous solution, sustained reagent excess, and no competing reagent loss; biological experiments often violate all three assumptions.\n\nCompatibility includes stability in water, an appropriate pH range, and tolerance of salts, dissolved oxygen, and cellular reducing agents. A reagent must remain intact long enough to encounter its partner, yet react rapidly once that encounter occurs. Increasing intrinsic reactivity can compromise storage stability or increase reactions with native molecules. Thus, maximizing the rate constant is not equivalent to optimizing a biological reagent.\n\nAccessibility imposes additional constraints. A charged, water-soluble probe may work well at the cell surface but cross the cell membrane poorly. A hydrophobic probe may enter cells yet accumulate in membranes or bind nonspecifically to proteins. Within tissues, diffusion, vascular transport, clearance, and local target density can become more important than the solution-phase rate constant.\n\n“Orthogonality” is therefore conditional rather than absolute. It must be demonstrated for a specified reagent pair, concentration, exposure time, compartment, and biological endpoint. In experiments using several reactions, an additional requirement is mutual orthogonality: each installed handle should react with its intended partner without appreciable cross-reaction with the others."
    },
    {
      "heading": "The Staudinger ligation and early azide chemistry",
      "text": "The Staudinger ligation builds on a reaction reported by Hermann Staudinger in 1919. In the classical Staudinger reaction, a phosphine attacks an organic azide, initiating a sequence that releases nitrogen gas and produces an iminophosphorane. Subsequent hydrolysis yields an amine and a phosphine oxide. The azide is reduced, but the two original reagents are not joined in the stable way required for most labeling experiments.\n\nThe ligation modifies the phosphine so that it carries a suitably positioned electrophilic trapping group, commonly an ester. After the phosphine reacts with the azide, intramolecular acyl transfer captures the nitrogen-containing intermediate. Hydrolysis then gives an amide-linked product. In the original, nontraceless form, part of the phosphine-derived structure remains attached to the ligation product. Later “traceless” variants were designed to generate an amide bond without retaining the phosphine oxide-containing appendage.\n\nOrganic azides were particularly valuable handles because they are small and absent from the ordinary functional-group repertoire of most cellular biomolecules. When appropriately placed, they can be tolerated in modified sugars, amino acids, and other metabolic precursors. Their small size reduces, but does not eliminate, the possibility of disturbing transport, enzyme recognition, or molecular function. Installing an azide is therefore an experimental modification whose biological consequences still require assessment.\n\nAn influential application used azide-bearing precursors of sialic acid, a family of acidic sugars commonly found at the ends of vertebrate cell-surface glycans. Cellular biosynthetic pathways converted the precursor into azide-bearing sialic acids and displayed them on glycoproteins and glycolipids. A phosphine carrying a detectable tag could then selectively label these surface structures. This separated metabolic incorporation of a small handle from subsequent attachment of a much larger reporter.\n\nThe Staudinger ligation provided a foundational demonstration that deliberate synthetic chemistry could operate selectively in a cellular setting. Its practical limitations include relatively slow reaction rates and the susceptibility of many phosphines to oxidation, which converts them into forms unable to perform the desired ligation. Probe solubility and background interactions can also limit performance.\n\nThe reaction nevertheless remains important both historically and mechanistically. It established the two-step labeling architecture that became characteristic of the field: first introduce a small, biologically tolerated reactive group, then deliver a complementary chemical reagent. It also illustrates that a reaction need not be the fastest available to be useful. Its value depends on the target, labeling interval, reagent accessibility, and compatibility requirements of the particular experiment."
    },
    {
      "heading": "Azide–alkyne cycloadditions: copper catalysis and ring strain",
      "text": "Azides and alkynes can combine through a cycloaddition to form a five-membered triazole ring. The uncatalyzed reaction of an ordinary terminal alkyne with an azide is generally too slow at physiological temperature for efficient biological labeling and can yield different regioisomers. Copper(I) catalysis transforms its practical utility: the copper-catalyzed azide–alkyne cycloaddition, commonly abbreviated CuAAC, gives predominantly the 1,4-disubstituted 1,2,3-triazole with high efficiency.\n\nCuAAC involves copper coordination and copper–acetylide chemistry rather than simply accelerating the uncatalyzed pathway. Mechanistic studies have established important roles for more than one copper center in commonly used catalytic systems. Ligands help maintain catalytically useful copper species, improve solubility, and influence the balance between productive reaction and unwanted chemistry. Copper(I) may be supplied directly or generated from copper(II) using a reducing agent.\n\nFor biological analysis, CuAAC has a major advantage: both the azide and terminal alkyne are compact handles. The smaller handle can be installed in a metabolite or drug analogue, while a bulky fluorescent or affinity tag is attached only after the biological process has occurred. The resulting triazole linkage is generally stable under the conditions used for imaging, purification, and molecular analysis.\n\nCopper also creates limitations. Copper-containing reaction mixtures can promote oxidative damage and disrupt cellular processes, especially in the presence of oxygen and reducing agents. Consequently, CuAAC is widely used after cell lysis or fixation, where maintaining living physiology is no longer required. Ligand-supported formulations have extended its use in living systems, but compatibility remains dependent on exposure conditions rather than guaranteed by the reaction name.\n\nThe strain-promoted azide–alkyne cycloaddition, or SPAAC, avoids a metal catalyst by using a strained cyclic alkyne. In a cyclooctyne, the ring constrains the alkyne away from its preferred approximately linear geometry. This distortion reduces part of the structural reorganization needed to reach the cycloaddition transition state. Electronic effects and substituent geometry can further alter the activation barrier.\n\nDeveloped cyclooctyne families include difluorinated cyclooctynes, dibenzocyclooctynes, and bicyclononynes. These structures offer different combinations of reaction rate, size, solubility, and chemical stability. Unlike a terminal alkyne, however, a strained cycloalkyne is a substantial molecular appendage. Aromatic versions may be hydrophobic, and some strained alkynes can show undesired interactions or reactions with biological components, including thiols.\n\nThe choice between CuAAC and SPAAC therefore reflects experimental context. CuAAC is often attractive for efficient analytical tagging after sample collection. SPAAC is valuable where a copper-free reaction is needed, particularly on living cell surfaces and in selected intracellular or organismal experiments. Neither approach removes the need to test whether the installed handle and completed conjugate preserve the biological behavior under study."
    },
    {
      "heading": "Tetrazine ligation and bond-cleavage reactions",
      "text": "The tetrazine ligation uses an electron-poor 1,2,4,5-tetrazine and a suitable alkene or alkyne. Its central step is an inverse-electron-demand Diels–Alder reaction, a type of cycloaddition in which the electronic roles differ from those of the conventional electron-rich diene and electron-poor dienophile pairing. Reaction with a strained alkene is followed by loss of nitrogen, producing a dihydropyridazine-derived adduct that may undergo further tautomerization or oxidation.\n\nTrans-cyclooctene is a particularly effective partner. Its eight-membered ring forces the trans alkene into a strained geometry, and its reaction with an appropriately substituted tetrazine can be exceptionally rapid. Reported second-order rate constants extend across several orders of magnitude, with some optimized pairs reaching approximately \\(10^6\\,\\mathrm{M^{-1}\\,s^{-1}}\\) or higher under specified conditions. These values are not generic properties of all tetrazines or all trans-cyclooctenes: substitution, stereochemistry, solvent, and temperature strongly affect the result.\n\nRapid ligation is especially useful when target or probe concentrations are low. It can permit substantial reaction before a small probe is cleared from circulation or before a labeled biological structure changes location. Alternative dienophiles, including norbornenes and cyclopropenes, offer different balances of size, stability, and rate. A compact but slower handle may be preferable when a large strained alkene would interfere with metabolic incorporation or protein function.\n\nThe same structural features that produce high rates can reduce practical robustness. Some tetrazines undergo reduction or degradation in biological media. Trans-cyclooctenes can isomerize to much less reactive cis forms, and their stability depends on molecular structure and environment. Linker design, steric protection, and attachment site consequently influence both the effective lifetime of the handle and its accessibility to the complementary reagent.\n\nTetrazine chemistry also enables bioorthogonal cleavage, often described as “click-to-release.” In suitably designed trans-cyclooctene systems, tetrazine ligation initiates rearrangement and elimination steps that cleave a linkage, such as an allylic carbamate. Rather than merely joining a reporter to a target, the reaction can release a previously masked molecule or detach a molecular component.\n\nLigation and release must be evaluated separately. A fast initial cycloaddition does not ensure rapid or quantitative liberation of the payload: subsequent reaction pathways can compete, and their rates depend on substitution and solution conditions. This distinction matters in studies of chemical control over proteins, imaging agents, and experimental drug activation. Demonstrating formation of the initial adduct is not by itself evidence that the intended functional molecule has been released."
    },
    {
      "heading": "Installing reactive handles in biomolecules",
      "text": "A bioorthogonal reaction identifies the position of an installed chemical handle, not automatically the position of an unmodified biological molecule. How the handle is introduced therefore determines what the experiment can measure. Major installation strategies include metabolic incorporation, genetic encoding, enzyme-mediated modification, and direct chemical conjugation. Each offers a different balance of specificity, coverage, and perturbation.\n\nMetabolic labeling supplies a modified precursor that cellular pathways convert into biomolecules. Azide-bearing monosaccharides can enter glycan biosynthesis; alkynyl fatty-acid analogues can report on aspects of lipid incorporation or protein acylation; and modified nucleosides can mark newly synthesized DNA or RNA. These probes exploit native biochemical machinery, but their uptake and conversion need not match those of the natural substrate. Signal intensity can reflect transport, precursor-pool dilution, enzyme specificity, and molecular turnover as well as synthesis.\n\nProtein synthesis can be followed using amino-acid analogues such as azidohomoalanine or homopropargylglycine, which can substitute for methionine in appropriate experimental systems. After incorporation during translation, the handle is coupled to an affinity or imaging reagent. A labeling pulse defines a cohort of newly synthesized proteins; a subsequent chase can reveal their persistence or redistribution. The pulse duration and intracellular precursor availability limit the temporal resolution.\n\nMore precise placement is possible through genetic code expansion. An engineered aminoacyl-transfer-RNA synthetase and a compatible transfer RNA introduce a noncanonical amino acid in response to a reassigned codon, often a stop codon such as UAG. The amino acid may carry an azide, strained alkene, strained alkyne, or another reactive group. This can place a handle at a chosen protein residue, although incorporation efficiency, competition with termination, and effects on protein folding must be considered.\n\nEnzyme-mediated methods attach handles to defined peptide sequences, terminal residues, or existing modifications. Examples include strategies based on sortases, transferases, and engineered self-labeling protein tags. These approaches can provide good positional control, but generally require an engineered recognition sequence or protein fusion. The specificity of handle installation derives from enzyme or tag recognition, whereas the subsequent ligation derives from the bioorthogonal reaction pair.\n\nDirect chemical attachment is particularly useful for purified antibodies and other proteins. Reactive handles can be coupled through lysine amines, cysteine thiols, or selectively modified glycans. Such attachment does not itself have to be bioorthogonal: it can be performed under controlled conditions before the conjugate enters a biological system. Heterogeneous attachment, however, can produce molecules with different handle numbers and sites, affecting binding, distribution, and reaction accessibility."
    },
    {
      "heading": "Detection, imaging, and molecular identification",
      "text": "Bioorthogonal handles are usually detected by attachment of a fluorophore, affinity tag, isotope-bearing group, or other reporter. The reaction supplies selectivity for the handle; the reporter determines the analytical readout. These functions are often deliberately separated so that a small precursor can participate in biology before a larger detection group is added. The approach is especially valuable when directly attaching a fluorophore would prevent transport or enzymatic processing.\n\nIn fluorescence imaging, unreacted probe can create substantial background. Washing removes free reagent in accessible samples, but this is less effective in intact tissues or rapidly changing systems. Fluorogenic probes address the problem by becoming more fluorescent after reaction. Certain tetrazine-containing probes suppress fluorophore emission before ligation; consumption of the tetrazine removes or reduces the quenching pathway. Other designs generate a fluorescent product through the reaction itself.\n\nFluorogenicity does not eliminate all interpretation problems. A probe may fluoresce after reacting with a handle at an unintended location, and its brightness can depend on local polarity, pH, or molecular interactions. Microscopy measures the distribution of detectable reaction product, which may differ from the original target distribution if the target moves, is degraded, or releases a labeled fragment during the labeling interval.\n\nFor biochemical identification, a handle can be coupled to biotin or another affinity group. Labeled molecules are then enriched, often using streptavidin-based capture, and analyzed by mass spectrometry. In proteomics, this can identify newly synthesized proteins, probe-bound proteins, or proteins bearing a particular modification. Cleavable linkers permit labeled material to be released from the affinity support, sometimes leaving a defined chemical remnant that aids identification.\n\nBioorthogonal chemistry also supports activity-based protein profiling. A small probe first interacts covalently with a class of active enzymes or other reactive proteins through a targeting group. A separate azide or alkyne handle then enables attachment of the reporter after cell treatment. The targeting reaction and the detection reaction have different functions: selective reaction with a native enzyme site is not necessarily bioorthogonal, whereas the subsequent handle–reporter coupling may be.\n\nQuantification requires attention to several efficiencies: precursor incorporation, accessibility of the handle, ligation yield, reporter brightness or recovery, and instrument response. Controls without the reactive precursor reveal background labeling, while competition and independent target measurements can help establish what the signal represents. A strong fluorescence or enrichment signal alone cannot establish that the underlying biological process increased, because changes at any earlier step can alter the final readout."
    },
    {
      "heading": "Applications in organisms, materials, and targeted delivery",
      "text": "Glycan imaging remains a defining application because many carbohydrate structures cannot be tracked by ordinary genetic fusion methods. Metabolic installation of azides followed by copper-free labeling has enabled visualization of glycan production and distribution in cultured cells and model organisms, including zebrafish. These experiments can reveal spatial and temporal patterns of cell-surface remodeling, but the labeled population is restricted to structures reached by the precursor and processed by the relevant biosynthetic pathways.\n\nIn neurobiology and other areas of cell biology, pulse labeling of newly synthesized proteins provides a chemical complement to measurements of gene expression. RNA abundance does not directly specify when a protein is produced or how long it survives. Bioorthogonal amino-acid labeling can isolate proteins synthesized during a defined interval, while cell-selective incorporation strategies can distinguish production by particular cell populations in a mixed sample. Such measurements depend on the specificity and efficiency of the incorporation system.\n\nA major organismal application is pretargeted imaging. A targeting molecule, often an antibody bearing a reactive handle, is administered first and allowed to accumulate at its target. A smaller complementary imaging probe is introduced later. Rapid ligation can retain the probe where the first agent is located, while unreacted probe clears more quickly. This separates slow biological targeting from the delivery of the imaging label.\n\nPretargeting has been investigated with fluorescent and radioactive reporters, including agents designed for positron emission tomography. Tetrazine–trans-cyclooctene chemistry is attractive because of its speed at low concentrations. Important constraints include persistence of the first handle in vivo, residual targeting agent in blood, accessibility of the target-bound handle, and the distribution and clearance of the second reagent. Chemical specificity does not ensure anatomical specificity if reactive material remains in an unintended compartment.\n\nIn biomaterials, complementary bioorthogonal groups can connect polymers or attach biological signals under aqueous conditions. Hydrogels assembled using copper-free cycloadditions can support cell encapsulation and allow independently chosen molecular features to be introduced into a three-dimensional matrix. Reaction rate affects whether the material mixes uniformly before gelation, and network architecture determines mechanical properties and transport. Linker degradation and unreacted functional groups remain relevant even when the crosslinking reaction itself is selective.\n\nExperimental delivery systems also use ligation or cleavage to concentrate, attach, or release molecular cargo. These include approaches to localized drug activation and assembly of therapeutic conjugates. Their biological outcome depends on much more than the underlying reaction: targeting, exposure, release efficiency, metabolism, and clearance all contribute. Successful chemical transformation in an organism is therefore a distinct result from demonstrated diagnostic or therapeutic benefit."
    },
    {
      "heading": "Limitations, validation, and emerging directions",
      "text": "The central limitation of bioorthogonal chemistry is that chemical selectivity cannot guarantee biological neutrality. A handle may alter a substrate’s transport or recognition; a linker may change an antibody’s binding or distribution; and a reporter can perturb the movement of the labeled molecule. Even if the ligation avoids native functional groups, the complete labeling system may influence the process being measured. “Bioorthogonal” should therefore not be interpreted as “biologically inert.”\n\nOff-target chemistry can arise at several stages. Metabolic precursors may enter unexpected pathways, reactive handles may degrade into species with different chemistry, and hydrophobic probes may associate nonspecifically with membranes or proteins. Some protected sugar analogues can also generate labeling behavior not fully explained by their intended glycan-biosynthetic route. Distinguishing pathway-dependent incorporation from other covalent or noncovalent associations is essential when interpreting such experiments.\n\nBiological timing creates another constraint. Labeling records encounters between two reagents over an interval rather than taking an instantaneous molecular photograph. A surface target can internalize before ligation, a metabolically labeled molecule can be degraded, and a fluorescent product can accumulate after the initiating event has ended. Shorter reaction times improve temporal resolution only if probe delivery and precursor incorporation are comparably well controlled.\n\nValidation therefore separates several questions: whether the handle entered the intended molecule, whether the complementary reagent reacted selectively, whether the product remained associated with the target, and whether the target retained its function. Appropriate comparisons can include omission of either reaction partner, use of a nonreactive analogue, independent identification of labeled products, and measurement of relevant cellular behavior. Agreement between imaging, biochemical enrichment, and molecular identification is stronger evidence than any one signal alone.\n\nA major research direction is the development of mutually compatible reaction sets for simultaneous or sequential labeling. Pairing two individually bioorthogonal reactions does not guarantee independence: tetrazines, strained alkenes, strained alkynes, azides, and other handles can have unwanted cross-reactivities. Designing a multicomponent system requires evaluating all possible pairings, including reactions with intermediates and degradation products, under the intended biological conditions.\n\nOther directions include smaller reactive handles, more stable high-speed ligation partners, improved fluorogenic reporters, and reactions activated by light or localized catalysts. Computational analysis of transition states and molecular distortion helps explain why particular structures react quickly, while cellular measurements reveal whether that reactivity survives in practice. Performance remains a multidimensional problem involving rate, selectivity, solubility, stability, transport, and preservation of biological function; gains in one property frequently impose costs in another."
    }
  ],
  "links": [
    "covalent-bond",
    "protein",
    "cell",
    "enzyme",
    "antibody",
    "glycosylation",
    "metabolism",
    "click-chemistry",
    "nobel-prize-in-chemistry",
    "chemical-kinetics",
    "water",
    "ph",
    "oxygen",
    "cell-membrane",
    "diffusion",
    "hydrolysis",
    "amino-acid",
    "catalysis",
    "activation-energy",
    "dna",
    "rna",
    "translation-biology",
    "transfer-rna",
    "codon",
    "protein-folding",
    "mass-spectrometry",
    "proteomics",
    "gene-expression",
    "positron-emission-tomography",
    "hydrogel",
    "light"
  ],
  "sources": [],
  "license": "https://creativecommons.org/licenses/by/4.0/"
}