{
  "id": "bernoullis-equation",
  "title": "Bernoulli’s Equation",
  "lang": "en",
  "source_lang": "en",
  "summary": "Bernoulli’s equation relates pressure, speed, and elevation in fluid flow, expressing mechanical energy conservation under specified conditions.",
  "category": "science",
  "subcategory": "physics",
  "type": "concept",
  "aliases": [
    "Bernoulli equation",
    "Bernoulli’s principle",
    "Bernoulli energy equation"
  ],
  "generated_at": "2026-11-03",
  "model": "pro/gpt-6.1-sol",
  "url": "https://aiwiki.page/en/bernoullis-equation/",
  "translations": {
    "zh-Hans": {
      "url": "https://aiwiki.page/zh/bernoullis-equation/",
      "json": "https://aiwiki.page/zh/bernoullis-equation.json"
    }
  },
  "sections": [
    {
      "heading": "",
      "text": "Bernoulli’s equation is a relationship among pressure, flow speed, and elevation in a moving fluid. In its familiar form, it states that the sum of pressure energy, kinetic energy, and gravitational potential energy per unit volume remains constant along a streamline in steady, incompressible flow when viscous effects are negligible. It is a central result of fluid mechanics, used to analyze flows through pipes and nozzles, interpret pressure measurements, and understand aspects of aerodynamic lift.\n\nThe equation is named after Daniel Bernoulli, whose Hydrodynamica, published in 1738, developed an energy-based account of fluid motion. Its modern mathematical formulation is closely connected with Euler’s equations of motion. Although often summarized as “faster flow means lower pressure,” that statement is valid only under particular conditions: changes in elevation, mechanical energy losses, machinery, compressibility, and differences between streamlines can all alter the relationship.\n\nBernoulli’s equation is therefore both a physical conservation statement and a controlled approximation. Its elementary form belongs to ideal-fluid mechanics; generalized forms extend its usefulness to engineering systems, compressible gases, and unsteady potential flows."
    },
    {
      "heading": "Forms of the equation and their physical meaning",
      "text": "For steady flow of a fluid with constant density \\(\\rho\\), subject to uniform gravity, the standard equation is\n\n\\[p+\\frac{1}{2}\\rho v^2+\\rho gz=C,\\]\n\nwhere \\(p\\) is static pressure, \\(v\\) is local speed, \\(g\\) is gravitational acceleration, \\(z\\) is elevation above a chosen datum, and \\(C\\) is constant along a streamline. A streamline is a curve whose tangent follows the instantaneous velocity direction. In steady flow, fluid particles follow these curves.\n\nEach term has the dimensions of energy per unit volume, or equivalently pressure. In the International System of Units, all three can be expressed in pascals. Dividing by density gives the specific-energy form,\n\n\\[\\frac{p}{\\rho}+\\frac{v^2}{2}+gz=B,\\]\n\nwhose terms have units of joules per kilogram. Dividing instead by \\(\\rho g\\) gives the head form,\n\n\\[\\frac{p}{\\rho g}+\\frac{v^2}{2g}+z=H.\\]\n\nHere every term has dimensions of length. Engineers call them pressure head, velocity head, and elevation head; their sum is total head. A pressure head of one metre means the pressure exerted by a one-metre column of the particular fluid, not a fixed pressure independent of density.\n\nThe pressure term requires careful interpretation. It is not generally the fluid’s microscopic internal energy. Rather, pressure forces perform work as fluid crosses the boundaries of a moving element or a control volume. For a volume \\(dV\\), pressure work has magnitude \\(p\\,dV\\), which explains the appearance of \\(p/\\rho\\) as pressure work per unit mass. The other terms represent the fluid’s macroscopic motion and position in a gravitational field.\n\nIn a horizontal ideal flow, an increase in speed must be accompanied by a decrease in static pressure along the same streamline. For water with density approximately \\(1{,}000\\ \\mathrm{kg\\,m^{-3}}\\), acceleration from \\(2\\) to \\(6\\ \\mathrm{m\\,s^{-1}}\\) corresponds to a pressure decrease of\n\n\\[\\Delta p=\\frac{\\rho}{2}(6^2-2^2)=16{,}000\\ \\mathrm{Pa}.\\]\n\nAt different elevations, part of the energy exchange instead involves gravity, so speed alone does not determine the pressure change.\n\nStatic pressure is the local mechanical pressure within the fluid. The quantity \\(q=\\rho v^2/2\\), called dynamic pressure, measures kinetic energy per unit volume; it is not an additional isotropic pressure acting independently on every surface. If a fluid is brought to rest without losses at unchanged elevation, its static pressure rises to the stagnation pressure,\n\n\\[p_0=p+\\frac12\\rho v^2.\\]\n\nThis distinction underlies pressure-based speed measurements."
    },
    {
      "heading": "Historical development and derivation from the equations of motion",
      "text": "Daniel Bernoulli’s Hydrodynamica appeared in 1738, when fluid mechanics was developing from hydrostatics and practical hydraulics into a mathematical theory of motion. Bernoulli analyzed moving liquids through an energy argument involving elevation and the quantity then known as vis viva, proportional to mass times speed squared. His treatment connected the discharge of liquids from vessels with pressures within moving streams.\n\nThe modern equation should not be understood as a verbatim transcription of a single formula in that book. Its familiar pressure–speed–elevation form emerged through eighteenth-century developments in mechanics. Leonhard Euler’s equations, developed in the 1750s, provided a general differential description of inviscid flow from which Bernoulli’s relation follows directly. This places it within classical mechanics and, specifically, Newton’s laws of motion.\n\nFor an inviscid fluid acted on by gravity, the Euler momentum equation is\n\n\\[\\frac{\\partial\\mathbf v}{\\partial t} +(\\mathbf v\\cdot\\nabla)\\mathbf v =-\\frac{1}{\\rho}\\nabla p-\\nabla(gz).\\]\n\nThe left-hand side is the acceleration of a fluid particle. It includes both local changes at a fixed position and changes caused by motion through a spatially varying velocity field. Consequently, steady flow need not be unaccelerated: water speeding through a narrowing pipe has nonzero acceleration even when conditions at every fixed point remain constant in time.\n\nIn steady flow, projecting the momentum equation along a streamline gives\n\n\\[v\\,dv+\\frac{dp}{\\rho}+g\\,dz=0.\\]\n\nIf density is constant, integration yields\n\n\\[\\frac{v^2}{2}+\\frac{p}{\\rho}+gz=B.\\]\n\nThis derivation makes the equation’s directional character explicit. In general, integration along one streamline establishes one constant; integration along another may establish a different constant.\n\nThe same result can be obtained through a mechanical-energy balance. Consider a small volume of fluid moving between two sections of a streamtube, a tube whose sides consist of streamlines. In steady incompressible flow, the entering and leaving volumes are equal. The net work done by pressure forces supplies the change in kinetic and gravitational potential energy. When viscous dissipation, shaft work, and other energy transfers are absent, the resulting balance is Bernoulli’s equation.\n\nThis energy interpretation links the result with the first law of thermodynamics, but the elementary equation is narrower than that law. The first law includes internal energy, heat transfer, and mechanical work in general. Bernoulli’s basic expression tracks a particular conserved combination of mechanical quantities under assumptions that allow the other contributions to be excluded."
    },
    {
      "heading": "Conditions of validity and the role of rotation",
      "text": "The standard equation assumes steady flow, constant density, negligible viscous effects along the path considered, and a conservative body force such as gravity. It also excludes an intervening pump or turbine unless the associated energy transfer is added explicitly. These conditions concern the region over which the equation is applied, not necessarily every part of an entire apparatus.\n\nFor example, a real fluid has viscosity, but viscous stresses may be small in much of a high-speed external flow. Bernoulli’s equation can then be useful outside a thin boundary layer, even though the near-wall layer is essential to drag, flow separation, and the formation of the wake. Conversely, applying the ideal equation over a long narrow pipe can be seriously misleading because wall friction causes substantial mechanical-energy loss.\n\nA further distinction concerns vorticity, defined by\n\n\\[\\boldsymbol{\\omega}=\\nabla\\times\\mathbf v.\\]\n\nFor steady, constant-density, inviscid flow, the momentum equation can be rearranged into\n\n\\[\\nabla\\left(\\frac{p}{\\rho}+\\frac{v^2}{2}+gz\\right) =\\mathbf v\\times\\boldsymbol{\\omega}.\\]\n\nTaking the scalar product with \\(\\mathbf v\\) shows that the Bernoulli function is constant along streamlines. If the flow is irrotational, meaning \\(\\boldsymbol{\\omega}=0\\), its gradient vanishes throughout a connected region, and the same Bernoulli constant applies across that region. Irrotationality is sufficient for a common constant, but it is not required for the ordinary along-streamline equation.\n\nRigid-body rotation illustrates the danger of comparing unrelated streamlines. A liquid rotating at angular speed \\(\\Omega\\) has azimuthal speed \\(v=\\Omega r\\). Radial momentum balance gives\n\n\\[\\frac{\\partial p}{\\partial r}=\\rho\\Omega^2r.\\]\n\nPressure therefore increases outward, even though speed also increases outward. There is no contradiction: the circular streamlines have different Bernoulli constants. At the free surface, the pressure is atmospheric, and the surface rises outward into a paraboloid,\n\n\\[z(r)=z(0)+\\frac{\\Omega^2r^2}{2g}.\\]\n\nBernoulli’s equation also does not determine the complete flow field by itself. Conservation of mass, geometry, and boundary conditions must provide additional information. In a steady incompressible streamtube, continuity gives \\(A_1V_1=A_2V_2\\), where \\(V\\) denotes the section’s mean normal velocity. Bernoulli’s relation then connects that velocity change with pressure and elevation, provided section averaging and nonuniform velocity profiles are handled appropriately.\n\nThe familiar phrase “a constriction lowers pressure” is thus conditional. For a specified flow through a smooth horizontal contraction, increased speed generally accompanies reduced static pressure. The equation alone does not establish how much fluid will flow, nor does it justify comparing arbitrary fast and slow regions."
    },
    {
      "heading": "Pressure-based measurement and flowmeters",
      "text": "A Pitot tube uses the difference between stagnation and static pressure to measure flow speed. Its forward-facing opening brings a small portion of the approaching flow to rest. A separate static-pressure measurement samples the surrounding stream without deliberately stopping it. For low-speed, approximately incompressible flow,\n\n\\[p_0-p=\\frac12\\rho v^2, \\qquad v=\\sqrt{\\frac{2(p_0-p)}{\\rho}}.\\]\n\nThe measurement is local: it estimates the velocity at the probe position rather than automatically giving the mean speed across an entire duct. A velocity survey or a known profile is needed to infer volume flow rate. Probe alignment, nearby walls, turbulence, blockage, and the arrangement of static ports can affect the measured pressure difference.\n\nA differential pressure of \\(150\\ \\mathrm{Pa}\\) in air of density \\(1.20\\ \\mathrm{kg\\,m^{-3}}\\) corresponds, under the incompressible approximation, to\n\n\\[v=\\sqrt{\\frac{2(150)}{1.20}}\\approx15.8\\ \\mathrm{m\\,s^{-1}}.\\]\n\nThe density value matters: the same pressure difference in a denser fluid represents a lower speed. At higher airspeeds, compressibility changes the relationship between stagnation pressure and velocity, and the elementary square-root formula is no longer sufficient.\n\nA Venturi meter instead infers flow rate from the pressure difference between a pipe section and a narrower throat. For horizontal, incompressible flow with approximately uniform section velocities, continuity and Bernoulli’s equation give\n\n\\[Q_{\\mathrm{ideal}} =A_2\\sqrt{\\frac{2(p_1-p_2)} {\\rho[1-(A_2/A_1)^2]}}.\\]\n\nFor circular sections, defining \\(\\beta=d_2/d_1\\) changes the denominator factor to \\(1-\\beta^4\\). Real meters require a discharge coefficient \\(C_d\\),\n\n\\[Q=C_dQ_{\\mathrm{ideal}},\\]\n\nto account for departures from the ideal model. The coefficient depends on meter geometry, pressure-tap arrangement, and flow conditions.\n\nA well-designed Venturi includes a gradual downstream expansion that recovers much of the static pressure lost during acceleration into the throat. The throat pressure reduction is therefore not the same as the permanent pressure loss across the whole instrument. An orifice plate produces stronger separation and generally a larger permanent loss, even though it also uses a restriction and a differential-pressure measurement.\n\nReliable use of these instruments involves calibration and measurement uncertainty, not merely substitution into a formula. For a simple Pitot measurement, velocity varies as the square root of differential pressure, so small relative pressure errors contribute approximately half as much relative velocity error when density is fixed. At very low speeds, however, the pressure difference becomes so small that sensor offsets and fluctuations may dominate the measurement."
    },
    {
      "heading": "Reservoir discharge, siphons, and open-channel flow",
      "text": "A classic application is discharge from a small opening in a large reservoir. Apply Bernoulli’s equation between the free surface and the emerging jet. If both points are at atmospheric pressure, the surface speed is negligible, and the opening lies a vertical distance \\(h\\) below the surface, then\n\n\\[v=\\sqrt{2gh}.\\]\n\nThis result is known as Torricelli’s law, associated with Evangelista Torricelli’s work in the seventeenth century. It gives the same speed as that acquired by an object falling freely through height \\(h\\), reflecting the conversion of gravitational potential energy into kinetic energy.\n\nAn opening \\(2.0\\ \\mathrm m\\) below the surface has an ideal discharge speed of about \\(6.3\\ \\mathrm{m\\,s^{-1}}\\). The volume discharge is not necessarily the opening area multiplied by this ideal speed. A jet emerging from a sharp-edged opening contracts after leaving it, forming a vena contracta. Viscous effects and geometric contraction are represented through coefficients, often combined in\n\n\\[Q=C_dA_o\\sqrt{2gh},\\]\n\nwhere \\(A_o\\) is the opening area. A draining reservoir also has a changing head, so its discharge decreases with time. Treating each instant as approximately steady is justified only when the reservoir level changes slowly relative to the flow’s adjustment time.\n\nA siphon transfers liquid through a filled tube over a crest to an outlet below the source surface. Bernoulli’s equation relates the pressure at the crest to its elevation and to the flow speed. The pressure there is usually below atmospheric pressure. The overall driving difference is the elevation drop between the source free surface and the outlet, with part of that available head consumed by friction and other losses.\n\nThe ideal atmospheric support height for water near sea level is about ten metres, but the attainable crest height is lower because the liquid has a nonzero vapor pressure, the moving liquid requires velocity head, and losses occur before the crest. Dissolved gas release and cavitation can interrupt the liquid column. The siphon cannot be analyzed correctly by assuming that every point in its tube remains at atmospheric pressure.\n\nIn open-channel hydraulics, pressure is often approximately hydrostatic across a section when vertical accelerations are small. For a rectangular channel with depth \\(y\\), mean speed \\(V\\), and nearly uniform velocity distribution, the specific energy relative to the bed is\n\n\\[E=y+\\frac{V^2}{2g}.\\]\n\nWriting discharge per unit width as \\(q=Vy\\) gives\n\n\\[E=y+\\frac{q^2}{2gy^2}.\\]\n\nAt fixed \\(q\\), this expression has a minimum at \\(y_c=(q^2/g)^{1/3}\\), corresponding to a Froude number of one. The relationship distinguishes subcritical and supercritical flow, but a hydraulic jump between them dissipates energy and requires a momentum balance rather than an ideal Bernoulli equality."
    },
    {
      "heading": "Real-fluid energy balances, pumps, and losses",
      "text": "Practical hydraulic systems use an extended mechanical-energy equation. For steady incompressible flow between two sections, a common form is\n\n\\[\\frac{p_1}{\\rho g} +\\alpha_1\\frac{V_1^2}{2g} +z_1+h_p = \\frac{p_2}{\\rho g} +\\alpha_2\\frac{V_2^2}{2g} +z_2+h_t+h_L.\\]\n\nHere \\(h_p\\) is head added to the fluid by a pump, \\(h_t\\) is head extracted by a turbine, and \\(h_L\\) is head lost through irreversible processes. The velocities \\(V_1\\) and \\(V_2\\) are section averages. This is often called the extended Bernoulli equation, although it is more generally a control-volume mechanical-energy balance.\n\nThe kinetic-energy correction factor \\(\\alpha\\) accounts for the difference between the actual kinetic-energy flux and an estimate based on mean velocity:\n\n\\[\\alpha=\\frac{1}{AV^3}\\int_A u^3\\,dA,\\]\n\nfor unidirectional flow normal to the section. Uniform velocity gives \\(\\alpha=1\\). Fully developed laminar flow in a circular pipe has a parabolic profile and \\(\\alpha=2\\). Many turbulent pipe profiles are flatter, making \\(\\alpha\\) closer to one, though its exact value remains flow-dependent.\n\nFor a straight circular pipe, the Darcy–Weisbach equation expresses frictional head loss as\n\n\\[h_f=f_D\\frac{L}{D}\\frac{V^2}{2g}.\\]\n\nThe Darcy friction factor \\(f_D\\) depends on the Reynolds number \\(Re=\\rho VD/\\mu\\), and, in turbulent flow, on relative wall roughness. Fully developed laminar flow has \\(f_D=64/Re\\). This Darcy factor must not be confused with the Fanning friction factor, which is one-quarter as large.\n\nValves, bends, entrances, exits, and changes in cross-section introduce additional losses, commonly represented by\n\n\\[h_{\\mathrm{local}}=K\\frac{V_{\\mathrm{ref}}^2}{2g}.\\]\n\nThe chosen reference velocity must be specified because different components may be characterized using different sections. The customary term “minor losses” does not mean these contributions are always small; in a short pipe system, they can exceed the distributed wall-friction loss.\n\nHead loss is not a disappearance of total energy. Viscous stresses and turbulent motion convert organized mechanical energy into internal energy. This irreversibility is associated with entropy production and is consistent with the second law of thermodynamics.\n\nThe hydraulic power delivered by a pump is\n\n\\[P_{\\mathrm{hyd}}=\\rho gQh_p.\\]\n\nIts required shaft power is larger by the inverse of the pump efficiency. In graphical hydraulic analysis, the energy grade line represents total head, while the hydraulic grade line represents \\(z+p/(\\rho g)\\); their separation is the velocity head, or its corrected value. Losses lower the energy grade line in the direction of flow, a pump raises it, and a turbine lowers it by extracting useful work."
    },
    {
      "heading": "Compressible flow and stagnation enthalpy",
      "text": "The expression \\(p/\\rho\\) cannot generally be used as the pressure contribution when density changes significantly. For steady inviscid flow with a barotropic pressure–density relationship, integration along a streamline instead gives\n\n\\[\\frac{v^2}{2}+\\int\\frac{dp}{\\rho}+\\Phi=B,\\]\n\nwhere \\(\\Phi\\) is gravitational potential per unit mass. A barotropic fluid has density determined by pressure alone within the flow considered. The integral requires an appropriate equation of state or another relation specifying how density changes.\n\nA particularly important case is isentropic flow. The thermodynamic identity for specific enthalpy \\(h\\) is\n\n\\[dh=T\\,ds+\\frac{dp}{\\rho}.\\]\n\nIf specific entropy \\(s\\) is constant, \\(dh=dp/\\rho\\), and the Bernoulli relation becomes\n\n\\[h+\\frac{v^2}{2}+\\Phi=h_0.\\]\n\nWhen gravitational changes are negligible, \\(h_0\\) is stagnation enthalpy: the enthalpy associated with bringing the fluid to rest adiabatically without shaft work. Unlike the elementary incompressible expression, this formulation explicitly includes thermodynamic changes within the gas.\n\nFor a calorically perfect ideal gas, \\(h=c_pT\\), so\n\n\\[T_0=T+\\frac{v^2}{2c_p}.\\]\n\nUsing the Mach number \\(M=v/a\\), where \\(a\\) is the local speed of sound, gives\n\n\\[\\frac{T_0}{T}=1+\\frac{\\gamma-1}{2}M^2.\\]\n\nIf the deceleration to rest is isentropic, the stagnation pressure is related to static pressure by\n\n\\[\\frac{p_0}{p} = \\left(1+\\frac{\\gamma-1}{2}M^2\\right)^{\\gamma/(\\gamma-1)}.\\]\n\nHere \\(\\gamma=c_p/c_v\\). This pressure relation, rather than \\(p_0=p+\\rho v^2/2\\), is required when compressibility is appreciable.\n\nFor many airflows with modest temperature changes, \\(M<0.3\\) is a useful engineering guideline for treating density variations as small. It is not a universal criterion: large externally imposed pressure or temperature changes can matter even at low Mach number. Conversely, a compressible-flow model may be necessary in a nozzle because acceleration itself produces substantial changes in pressure, density, and temperature.\n\nA shock wave illustrates the distinction between energy conservation and reversible Bernoulli relations. Across a stationary adiabatic shock without shaft work, stagnation enthalpy is conserved, while entropy rises and stagnation pressure falls. The isentropic pressure formula cannot be applied across the shock as if there were no loss. Shock analysis instead combines conservation of mass, momentum, and energy with the gas properties."
    },
    {
      "heading": "Aerodynamic lift and common misconceptions",
      "text": "Bernoulli’s equation connects velocity and pressure around an airfoil, but it does not independently determine the velocity field. A complete aerodynamic calculation must also satisfy mass conservation, the equations of motion, and boundary conditions. In attached low-speed flow outside the boundary layer, the nearly inviscid outer region often admits an approximately common Bernoulli constant inherited from the upstream flow.\n\nFor an incompressible outer flow at essentially unchanged elevation,\n\n\\[p+\\frac12\\rho v^2 = p_\\infty+\\frac12\\rho U_\\infty^2.\\]\n\nThe pressure coefficient is therefore\n\n\\[C_p =\\frac{p-p_\\infty}{\\tfrac12\\rho U_\\infty^2} =1-\\left(\\frac{v}{U_\\infty}\\right)^2.\\]\n\nA region where the outer-flow speed exceeds the free-stream speed has lower static pressure. Integrating the pressure forces, together with surface shear stresses, over the aircraft surface gives the resultant aerodynamic force.\n\nThe commonly repeated “equal transit time” explanation of lift is incorrect. Fluid particles that separate near a wing’s leading edge are not required to meet again at the trailing edge. There is no conservation law imposing equal travel times above and below the wing. Nor does lift require an upper surface longer than the lower surface: a symmetric airfoil at an appropriate angle of attack can generate lift, as can a thin flat plate under suitable conditions.\n\nFor idealized two-dimensional attached flow, the Kutta–Joukowski relation connects lift per unit span with circulation:\n\n\\[L'=\\rho U_\\infty\\Gamma,\\]\n\nwith the sign depending on the circulation convention. Circulation characterizes the velocity field that produces the pressure distribution. Viscous effects near the surface and trailing edge help establish the physically realized circulation, even when the outer flow is modeled as inviscid.\n\nPressure-based and momentum-based explanations of lift are not competing theories. The wing exerts forces on the surrounding air and changes its momentum; the air exerts an opposite force on the wing. Surface-pressure integration and a correctly constructed control-volume momentum balance describe the same interaction.\n\nBernoulli’s equation becomes less directly useful inside boundary layers, separated regions, wakes, and shocks. In a stall, for example, extensive separation changes the velocity and pressure fields, so a simple attached-flow model no longer predicts the forces reliably. Nevertheless, local Bernoulli relations may remain useful in portions of the surrounding flow where their assumptions still hold."
    },
    {
      "heading": "Unsteady potential flow, waves, and computational uses",
      "text": "An unsteady flow generally requires a time-dependent form rather than the ordinary steady equation. If an inviscid, constant-density flow is irrotational, its velocity can locally be written using a velocity potential \\(\\phi\\):\n\n\\[\\mathbf v=\\nabla\\phi.\\]\n\nIntegrating Euler’s equation in space then gives\n\n\\[\\frac{\\partial\\phi}{\\partial t} +\\frac12|\\nabla\\phi|^2 +\\frac{p}{\\rho} +gz =C(t).\\]\n\nThe extra term \\(\\partial\\phi/\\partial t\\) represents effects of the evolving velocity field. Even at a point where instantaneous speed is small, pressure can differ substantially from a hydrostatic value because the fluid is accelerating.\n\nThe function \\(C(t)\\) reflects freedom in choosing the potential’s reference. Adding a function of time to \\(\\phi\\) leaves \\(\\nabla\\phi\\), and therefore the physical velocity, unchanged. An appropriate choice can absorb \\(C(t)\\). This freedom is mathematical rather than a change in the observable pressure or motion.\n\nThe unsteady equation provides the dynamic boundary condition in water-wave theory. At a free surface \\(z=\\eta(x,t)\\), pressure is approximately atmospheric if air-pressure variations and surface tension are neglected. Linearizing for small-amplitude waves gives, at the undisturbed surface,\n\n\\[\\frac{\\partial\\phi}{\\partial t}+g\\eta=0.\\]\n\nThe kinematic condition states that the surface moves with the fluid,\n\n\\[\\frac{\\partial\\eta}{\\partial t} =\\frac{\\partial\\phi}{\\partial z},\\]\n\nin the same linear approximation. Combined with incompressibility, which gives \\(\\nabla^2\\phi=0\\), and an impermeable horizontal bed, these conditions produce the gravity-wave dispersion relation\n\n\\[\\omega^2=gk\\tanh(kh),\\]\n\nwhere \\(h\\) is water depth, \\(k\\) is wavenumber, and \\(\\omega\\) is angular frequency. Surface tension adds a further restoring contribution at shorter wavelengths.\n\nUnsteady Bernoulli theory also describes pressure associated with accelerating bodies, oscillating liquid surfaces, and idealized bubble motion. It supplies pressure once a suitable potential-flow solution is known; it does not remove the need to determine that solution and enforce the moving boundaries.\n\nIn computational fluid dynamics, Bernoulli quantities provide useful diagnostics and boundary-condition relationships. In a steady inviscid test problem, an unexplained change along a streamline can indicate numerical error or inconsistent boundary data. In viscous or compressible calculations, however, a changing elementary Bernoulli quantity may be physically correct. A solver must retain the momentum and energy equations appropriate to the problem rather than impose a conservation relation whose assumptions are not satisfied."
    }
  ],
  "links": [
    "pressure",
    "kinetic-energy",
    "potential-energy",
    "fluid-mechanics",
    "density",
    "gravity",
    "energy-density",
    "international-system-of-units",
    "internal-energy",
    "work-physics",
    "classical-mechanics",
    "newtons-laws-of-motion",
    "first-law-of-thermodynamics",
    "heat",
    "viscosity",
    "boundary-layer",
    "conservation-of-mass",
    "calibration",
    "measurement-uncertainty",
    "reynolds-number",
    "energy",
    "turbulence",
    "entropy",
    "second-law-of-thermodynamics",
    "equation-of-state",
    "enthalpy",
    "ideal-gas",
    "surface-tension"
  ],
  "sources": [],
  "license": "https://creativecommons.org/licenses/by/4.0/"
}