{
  "id": "atomic-radius",
  "title": "Atomic Radius",
  "lang": "en",
  "source_lang": "en",
  "summary": "Atomic radius is a convention-dependent measure of an atom’s size, inferred from interatomic distances or defined from its electron distribution.",
  "category": "science",
  "subcategory": "chemistry",
  "type": "concept",
  "aliases": [
    "Atomic size"
  ],
  "generated_at": "2026-11-04",
  "model": "pro/gpt-6.1-sol",
  "url": "https://aiwiki.page/en/atomic-radius/",
  "translations": {
    "zh-Hans": {
      "url": "https://aiwiki.page/zh/atomic-radius/",
      "json": "https://aiwiki.page/zh/atomic-radius.json"
    }
  },
  "sections": [
    {
      "heading": "",
      "text": "Atomic radius is a measure of the size of an atom, usually expressed as a characteristic distance from its nucleus to the outer region occupied by its electrons. Because an atom has no sharp boundary, atomic radius is not a single, uniquely defined property. Different definitions describe atoms joined by bonds, packed in metals, approaching without bonding, or treated as isolated quantum systems. Each is useful in a particular context, but their numerical values are not interchangeable."
    },
    {
      "heading": "Physical meaning and units",
      "text": "An atom consists of a compact atomic nucleus surrounded by electrons. Nearly all its spatial extent comes from the electrons rather than the nucleus. In quantum mechanics, electrons are described by quantum states, not by particles moving along fixed circular paths. Their spatial distributions generally decrease gradually with distance rather than ending at a definite surface.\n\nConsequently, assigning a radius requires an operational definition: a rule connecting “size” to a measured distance or a calculated distribution. A radius may represent half a bond length, an effective boundary for nonbonded contact, or a statistic describing the electronic distribution of an isolated atom.\n\nAtomic radii are commonly reported in picometres (pm) or ångströms (Å):\n\n\\[1\\ \\text{Å}=100\\ \\text{pm}=10^{-10}\\ \\text{m}.\\]\n\nMany commonly tabulated atomic radii fall roughly between 30 and 300 pm, although the range depends on the definition and the electronic state. The atomic nucleus is much smaller, with a typical radius on the femtometre scale."
    },
    {
      "heading": "Main definitions",
      "text": "Covalent radius\n\nA covalent radius describes an atom participating in a covalent bond. For two identical atoms joined by a specified bond, the simplest definition is half their internuclear distance:\n\n\\[r_{\\mathrm{cov}}=\\frac{d(A-A)}{2}.\\]\n\nFor a bond between different elements, an approximate additive relation is often used:\n\n\\[d(A-B)\\approx r_{\\mathrm{cov}}(A)+r_{\\mathrm{cov}}(B).\\]\n\nThis relation is useful but not exact. Bond length also depends on bond order, charge distribution, and chemical environment. Separate radii may therefore be assigned for single, double, and triple bonds; increasing bond order generally corresponds to shorter bonds and smaller assigned covalent radii.\n\nA covalent radius is thus an empirical parameter summarizing bond lengths, not a directly observed outer surface.\n\nMetallic radius\n\nA metallic radius is commonly defined as half the nearest-neighbour internuclear distance in an elemental metallic crystal:\n\n\\[r_{\\mathrm{met}}=\\frac{d_{\\mathrm{nearest}}}{2}.\\]\n\nIts value depends on crystal structure, the number of neighbouring atoms, and physical conditions. Different crystal forms of the same element can therefore yield different metallic radii. Comparisons are most meaningful when these structural differences are considered.\n\nVan der Waals radius\n\nA van der Waals radius characterizes the effective size of an atom in nonbonded contact. It is commonly inferred from distances between atoms that are not joined by a chemical bond, including contacts between different molecules in crystals.\n\nAn approximate contact distance is written as\n\n\\[d_{\\mathrm{contact}}(A,B)\\approx r_{\\mathrm{vdW}}(A)+r_{\\mathrm{vdW}}(B).\\]\n\nThese radii are associated with the balance between attractive van der Waals forces and strong short-range repulsion. They are generally larger than covalent radii for the same element.\n\nNonbonded contacts are not rigid constraints. Their distances vary with chemical environment, orientation, and the interaction involved. In particular, a contact involving a hydrogen bond should not automatically be treated as an ordinary van der Waals contact.\n\nIonic radius\n\nAn ionic radius is an effective size assigned to an ion, usually by partitioning distances between ions in a crystal. Although distinct from the radius of a neutral atom, it is often discussed alongside atomic radii.\n\nA measured cation–anion distance can be approximated by\n\n\\[d\\approx r_{+}+r_{-}.\\]\n\nThe distance alone does not uniquely determine both radii; a reference convention and a consistent assignment scheme are needed. Ionic radii depend strongly on oxidation state, coordination number, and, for some transition-metal ions, spin state.\n\nCations are generally smaller than their parent neutral atoms, while anions are generally larger. These comparisons remain qualitative unless the radius definitions and environments are specified.\n\nCalculated radii of isolated atoms\n\nFor an isolated atom, size can be defined from its electron density or from properties of individual atomic orbitals. Possible measures include:\n\n- the mean electron–nucleus distance;\n- the root-mean-square distance;\n- the position of a maximum in an orbital’s radial probability distribution;\n- the radius of a sphere containing a chosen fraction of the total electron density;\n- a boundary defined by a specified electron-density value.\n\nThese definitions answer different questions and need not agree. In a many-electron atom, a maximum associated with an inner shell does not necessarily characterize the atom’s chemically relevant outer extent."
    },
    {
      "heading": "Quantum-mechanical illustration",
      "text": "The ground state of hydrogen provides a clear example of why different size measures give different answers. Its radial probability distribution has its maximum at the Bohr radius,\n\n\\[a_0\\approx 52.9\\ \\text{pm}.\\]\n\nHowever, the mean electron–nucleus distance is\n\n\\[\\langle r\\rangle=\\frac{3}{2}a_0,\\]\n\nand the root-mean-square distance is\n\n\\[\\sqrt{\\langle r^2\\rangle}=\\sqrt{3}\\,a_0.\\]\n\nThese are distinct, valid measures of the same distribution. None marks an edge beyond which the electron cannot be found.\n\nIn the nonrelativistic approximation with a stationary nucleus, a hydrogen-like ion with nuclear charge \\(Z\\) has a ground-state radial probability maximum at \\(a_0/Z\\). Stronger nuclear attraction therefore contracts the distribution in this simple one-electron system. Many-electron atoms require additional treatment of electron–electron interactions."
    },
    {
      "heading": "Periodic trends",
      "text": "Atomic radii show broad patterns across the periodic table, reflecting changes in nuclear charge and electron configuration. These patterns are clearest when values from the same radius convention are compared.\n\nAcross a period\n\nAtomic radii generally decrease from left to right across a period, particularly among the main-group elements. As atomic number increases, electrons are added largely to the same principal shell while nuclear charge increases. The additional electrons do not completely screen one another from that increased attraction.\n\nThis is often expressed using effective nuclear charge:\n\n\\[Z_{\\mathrm{eff}}=Z-S,\\]\n\nwhere \\(Z\\) is nuclear charge and \\(S\\) is an approximate screening parameter. This expression summarizes a model rather than providing a unique, exact charge experienced by every electron.\n\nComparisons can become misleading when a table changes conventions—for example, by placing noble-gas van der Waals radii beside covalent radii for neighbouring elements.\n\nDown a group\n\nAtomic radii generally increase down a group because occupied electron shells with larger principal quantum numbers are introduced. Greater screening by inner electrons also reduces the attraction experienced by outer electrons relative to the full nuclear charge.\n\nThis overall expansion occurs despite the increase in nuclear charge. The balance between shell structure, screening, and attraction—not nuclear charge alone—determines the trend.\n\nTransition elements and heavy elements\n\nAcross a transition series, radii often change less dramatically than across a main-group period. Electrons added to an inner \\(d\\) subshell partly offset the effect of increasing nuclear charge, and changes in bonding and crystal structure also matter.\n\nThe lanthanide contraction is the progressive reduction in characteristic atomic and ionic sizes across the lanthanides. The relatively ineffective screening by added \\(4f\\) electrons contributes to this contraction. It helps explain why corresponding elements in the second and third transition series, such as zirconium and hafnium, can have very similar sizes.\n\nFor heavy elements, relativistic effects also alter orbital dimensions and complicate simple periodic predictions.\n\nIons with the same electron count\n\nIn an isoelectronic series, species have the same number of electrons but different nuclear charges. Their radii generally decrease as nuclear charge increases. A familiar qualitative sequence is\n\n\\[\\mathrm{O^{2-}>F^{-}>Na^{+}>Mg^{2+}},\\]\n\nwith all four ions containing ten electrons. Quantitative comparisons still require compatible ionic-radius conventions and coordination environments."
    },
    {
      "heading": "Determination and historical development",
      "text": "Atomic radii are usually inferred rather than measured as isolated geometric boundaries. X-ray crystallography provides interatomic distances in crystals; neutron and electron diffraction provide complementary structural information. For suitable molecules, spectroscopy supplies information from which bond lengths can be determined.\n\nConverting these distances into radii requires a model. A measured distance between equivalent atoms may be divided equally, while distances between unlike atoms require a scheme for assigning contributions to each species. Statistical analysis of many structures can then produce transferable radius tables.\n\nThe development of crystal diffraction in the early twentieth century made systematic distance-based radius scales possible. Work on chemical bonding, including that of Linus Pauling, helped establish covalent and ionic radii as practical chemical tools. Later compilations refined these scales using larger structural datasets and more explicit treatment of coordination, bond order, and electronic state.\n\nA radius table’s precision must be distinguished from its transferability. A bond distance in one crystal may be known accurately even though the radius inferred from it varies appreciably between chemical environments."
    },
    {
      "heading": "Applications and limitations",
      "text": "Atomic and ionic radii support estimates of bond lengths, crystal packing, substitution in solids, and steric crowding. They also help interpret chemical trends alongside properties such as ionization energy and electronegativity, although these properties cannot be predicted from radius alone.\n\nIn molecular dynamics, size parameters help describe short-range interactions. Such parameters are model-dependent: a parameter in an interaction potential is not automatically identical to a tabulated covalent or van der Waals radius.\n\nSeveral limitations govern the use of atomic radii:\n\n- Definition dependence: covalent, metallic, ionic, and nonbonded radii describe different situations.\n- Environmental dependence: bonding, coordination, charge, and electronic state can change effective size.\n- Directional variation: an atom’s electron distribution in a molecule or crystal need not be spherical.\n- Condition dependence: pressure and temperature can alter interatomic distances and crystal structures.\n- Limited additivity: sums of radii approximate distances but do not replace a description of chemical interactions.\n\nA meaningful numerical atomic radius therefore requires its definition, relevant chemical state, and structural context."
    }
  ],
  "links": [
    "atom",
    "atomic-nucleus",
    "electron",
    "quantum-mechanics",
    "angstrom",
    "covalent-bond",
    "van-der-waals-forces",
    "hydrogen-bond",
    "ion",
    "oxidation-state",
    "electron-density",
    "atomic-orbital",
    "hydrogen",
    "bohr-radius",
    "periodic-table",
    "electron-configuration",
    "atomic-number",
    "x-ray-crystallography",
    "spectroscopy",
    "linus-pauling",
    "ionization-energy",
    "electronegativity",
    "molecular-dynamics"
  ],
  "sources": [],
  "license": "https://creativecommons.org/licenses/by/4.0/"
}