{
  "id": "astronomical-unit",
  "title": "Astronomical Unit",
  "lang": "en",
  "source_lang": "en",
  "summary": "The astronomical unit is a unit of length equal to exactly 149,597,870,700 metres, used chiefly for distances within and around planetary systems.",
  "category": "science",
  "subcategory": "astronomy",
  "type": "concept",
  "aliases": [
    "au",
    "AU",
    "astronomical unit of length"
  ],
  "generated_at": "2026-11-04",
  "model": "pro/gpt-6.1-sol",
  "url": "https://aiwiki.page/en/astronomical-unit/",
  "translations": {
    "zh-Hans": {
      "url": "https://aiwiki.page/zh/astronomical-unit/",
      "json": "https://aiwiki.page/zh/astronomical-unit.json"
    }
  },
  "sections": [
    {
      "heading": "",
      "text": "The astronomical unit, with the standardized symbol au, is a unit of length defined as exactly \\(149\\,597\\,870\\,700\\) metres. It is approximately the distance between Earth and the Sun and provides a convenient scale for describing the Solar System and other planetary systems. Historically, its value was determined from astronomical observations; since 2012, it has been a fixed length rather than a measured property of Earth’s orbit."
    },
    {
      "heading": "Definition and notation",
      "text": "The International Astronomical Union adopted the present definition in 2012:\n\n\\[1\\ \\mathrm{au}=149\\,597\\,870\\,700\\ \\mathrm{m} =149\\,597\\,870.7\\ \\mathrm{km}.\\]\n\nBoth equalities are exact. The astronomical unit is not an SI unit, but it is accepted for use with the SI.\n\nThe internationally recommended symbol is lowercase au, written in upright type and separated from the numerical value by a space, as in \\(5.2\\ \\mathrm{au}\\). The forms AU and a.u. occur in older publications and informal writing, but au is the standardized symbol. Like other unit symbols, it does not take a plural ending.\n\nBecause its conversion to metres is fixed, the astronomical unit itself has no measurement uncertainty. A distance measured and expressed in astronomical units can nevertheless have substantial uncertainty."
    },
    {
      "heading": "Relationship to Earth’s orbit",
      "text": "The astronomical unit is often described as the “average Earth–Sun distance.” This is a useful approximation, not its modern definition.\n\nEarth follows an approximately elliptical orbit. Its distance from the Sun varies from about \\(147.1\\) million kilometres near perihelion, its closest approach, to about \\(152.1\\) million kilometres near aphelion, its greatest separation. These correspond to approximately \\(0.983\\ \\mathrm{au}\\) and \\(1.017\\ \\mathrm{au}\\), respectively.\n\nIn a simple elliptical model, the orbital semimajor axis is\n\n\\[a=\\frac{r_{\\mathrm{perihelion}}+r_{\\mathrm{aphelion}}}{2}.\\]\n\nEarth’s orbital semimajor axis is close to one astronomical unit. However, a semimajor axis is not generally identical to a time-averaged orbital distance. Earth’s actual trajectory is also affected by the gravitational attraction of the Moon and other planets, so a precise orbital description requires more than a fixed ellipse.\n\nChanges in Earth’s orbit do not change the defined length of the astronomical unit."
    },
    {
      "heading": "Historical determination",
      "text": "Establishing the scale of the Solar System\n\nThe planetary laws associated with Johannes Kepler allowed astronomers to calculate relative orbital sizes from orbital periods. They did not, by themselves, establish those sizes in terrestrial units of length. Measuring one suitable distance was therefore essential to determining the physical scale of the Solar System.\n\nEarly estimates used geometric observations of the Sun, Moon, and planets. Later methods relied on parallax: the apparent shift in an object’s position when observed from different locations. Observations of Mars against background stars, made from widely separated observing sites, helped estimate its distance and thereby the Earth–Sun distance.\n\nTransits of Venus were especially important during the eighteenth and nineteenth centuries. Observers at different locations recorded Venus crossing the Sun’s disk, allowing geometric estimates of the Solar System’s scale. These measurements were limited by atmospheric conditions, timing accuracy, and difficulties in identifying the precise moments when Venus appeared to touch the solar limb.\n\nRadar and spacecraft measurements\n\nIn the twentieth century, radar ranging to planets greatly improved distance measurements. The round-trip travel time of a radio signal gives a distance approximately equal to\n\n\\[d=\\frac{c\\,\\Delta t}{2},\\]\n\nwhere \\(c\\) is the speed of light and \\(\\Delta t\\) is the elapsed round-trip time. Precision measurements require corrections for the motion of the observer and target, signal propagation, and relativistic effects.\n\nSpacecraft tracking further improved models of planetary positions and motions.\n\nFrom a dynamical unit to a fixed length\n\nBefore 2012, the astronomical unit was defined through a system of astronomical units in which the Gaussian gravitational constant had a fixed numerical value. Its length in metres was inferred from observations and planetary dynamical models, rather than assigned exactly.\n\nThe 2012 redefinition separated the unit from that dynamical framework. The astronomical unit became an exact number of metres, while the Sun’s gravitational parameter—the product of the gravitational constant and solar mass—remained a quantity determined from observations. This removed the need to treat the metre value of the astronomical unit as an adjustable astronomical parameter."
    },
    {
      "heading": "Uses and related distance units",
      "text": "Astronomical units keep planetary distances compact and readily comparable. Approximate orbital semimajor axes include:\n\nObject | Orbital semimajor axis\nEarth | \\(1.00\\ \\mathrm{au}\\)\nMars | \\(1.52\\ \\mathrm{au}\\)\nJupiter | \\(5.20\\ \\mathrm{au}\\)\nNeptune | \\(30.1\\ \\mathrm{au}\\)\n\nThese values describe orbital sizes, not instantaneous distances from Earth. Astronomical units are also used for cometary orbits, circumstellar disks, and the orbits of exoplanets.\n\nLight-travel time\n\nUsing the exact speed of light in vacuum, the time required for light to traverse one astronomical unit is\n\n\\[\\frac{1\\ \\mathrm{au}}{c}\\approx499.0048\\ \\mathrm{s},\\]\n\nor approximately 8 minutes 19 seconds. Actual sunlight travel time to Earth varies with Earth’s distance from the Sun.\n\nA light-year is approximately \\(63\\,241.1\\ \\mathrm{au}\\).\n\nThe parsec\n\nThe parsec is directly related to the astronomical unit through the geometry of stellar parallax. Its modern definition is\n\n\\[1\\ \\mathrm{pc}=\\frac{648\\,000}{\\pi}\\ \\mathrm{au} \\approx206\\,264.806\\ \\mathrm{au}.\\]\n\nThis corresponds to the small-angle relationship for a baseline of one astronomical unit subtending one arcsecond. Parsecs and their multiples are generally more convenient than astronomical units for distances between stars and galaxies."
    },
    {
      "heading": "Precision and interpretation",
      "text": "An exact unit conversion does not make an astronomical distance exact. Reported distances still depend on observations, their uncertainties, and the model used to interpret them.\n\nPrecision work must also specify what distance is intended: for example, a separation measured from the Sun’s centre, a position relative to the Solar System’s centre of mass, or an orbital semimajor axis. At high precision, general relativity requires explicit coordinate and time conventions. The fixed definition of the astronomical unit provides a stable length scale; it does not remove these distinctions."
    }
  ],
  "links": [
    "metre",
    "earth",
    "sun",
    "solar-system",
    "international-system-of-units",
    "measurement-uncertainty",
    "gravity",
    "moon",
    "johannes-kepler",
    "mars",
    "speed-of-light",
    "light-year",
    "parsec",
    "center-of-mass",
    "general-relativity"
  ],
  "sources": [],
  "license": "https://creativecommons.org/licenses/by/4.0/"
}