{
  "id": "archimedean-spiral",
  "title": "Archimedean Spiral",
  "lang": "en",
  "source_lang": "en",
  "summary": "An Archimedean spiral is a plane curve whose distance from a fixed point changes linearly with its angular position, producing equally spaced successive turns.",
  "category": "mathematics",
  "subcategory": "geometry",
  "type": "concept",
  "aliases": [
    "Spiral of Archimedes",
    "arithmetic spiral"
  ],
  "generated_at": "2026-11-06",
  "model": "pro/gpt-6.1-sol",
  "url": "https://aiwiki.page/en/archimedean-spiral/",
  "translations": {
    "zh-Hans": {
      "url": "https://aiwiki.page/zh/archimedean-spiral/",
      "json": "https://aiwiki.page/zh/archimedean-spiral.json"
    }
  },
  "sections": [
    {
      "heading": "",
      "text": "An Archimedean spiral is a plane geometric curve in which the distance from a fixed point, called the pole, changes at a constant rate with the angle around that point. In polar coordinates, its standard equation is \\(r=a+b\\theta\\), where \\(a\\) and \\(b\\) are constants. Its characteristic property is that successive turns have a constant radial separation. The curve is named after Archimedes, who studied its tangents and areas in his treatise On Spirals."
    },
    {
      "heading": "Definition and equations",
      "text": "The polar equation is\n\n\\[r=a+b\\theta,\\]\n\nwith angles measured in radians. The constant \\(a\\) specifies the radius at \\(\\theta=0\\), while \\(b\\) specifies the change in radius per unit angle. When \\(b=0\\), the equation describes a circle rather than a spiral. A common standard form is\n\n\\[r=b\\theta,\\qquad b>0,\\quad \\theta\\geq0,\\]\n\nwhich begins at the pole and winds outward counterclockwise.\n\nUsing the Cartesian coordinate system, a parametrization is\n\n\\[x(\\theta)=(a+b\\theta)\\cos\\theta, \\qquad y(\\theta)=(a+b\\theta)\\sin\\theta.\\]\n\nThe domain matters. Restricting to \\(r\\geq0\\) gives the usual outward-winding portion. Allowing negative radii extends the parametrized curve: in polar coordinates, a negative radius places the point in the direction opposite to the stated angle.\n\nFor the same angular direction on consecutive turns,\n\n\\[r(\\theta+2\\pi)-r(\\theta)=2\\pi b.\\]\n\nThus the radial pitch, or separation of successive turns along a ray from the pole, is\n\n\\[p=2\\pi|b|.\\]\n\nThis is a radial separation, not an assertion that the shortest distance between neighboring turns is everywhere constant.\n\nChanging \\(a\\) shifts where a chosen parameter interval begins. For \\(b\\neq0\\), an appropriate shift of angular parameter also shows that the complete unrestricted curves with different \\(a\\) are related by rotation. Changing \\(|b|\\) changes the overall scale."
    },
    {
      "heading": "Generation by uniform motion",
      "text": "The spiral has a simple mechanical interpretation. Suppose a ray rotates about its endpoint with constant angular velocity \\(\\omega\\), while a point moves along the ray with constant radial velocity \\(v\\). Then\n\n\\[\\theta(t)=\\theta_0+\\omega t, \\qquad r(t)=r_0+vt.\\]\n\nFor \\(\\omega\\neq0\\), eliminating time gives\n\n\\[r=r_0+\\frac{v}{\\omega}(\\theta-\\theta_0).\\]\n\nThe trajectory is therefore an Archimedean spiral, with \\(b=v/\\omega\\).\n\nAlthough both the radial velocity and angular velocity are constant, the point's speed along the curve is not. Its magnitude is\n\n\\[\\frac{ds}{dt} = \\sqrt{v^2+\\omega^2r^2},\\]\n\nso it increases as the point moves farther from the pole. Uniform angular increments likewise do not correspond to equal distances measured along the spiral."
    },
    {
      "heading": "Tangents and curvature",
      "text": "The tangent follows by taking the derivatives of the Cartesian parametrization:\n\n\\[\\frac{dx}{d\\theta}=b\\cos\\theta-r\\sin\\theta, \\qquad \\frac{dy}{d\\theta}=b\\sin\\theta+r\\cos\\theta.\\]\n\nWhere \\(dx/d\\theta\\neq0\\), the slope is\n\n\\[\\frac{dy}{dx} = \\frac{b\\sin\\theta+r\\cos\\theta} {b\\cos\\theta-r\\sin\\theta}.\\]\n\nFor \\(b>0\\) and \\(r>0\\), the angle \\(\\psi\\) between the outward radial direction and the tangent in the direction of increasing \\(\\theta\\) satisfies\n\n\\[\\tan\\psi=\\frac{r}{b}.\\]\n\nNear the pole, the tangent is nearly radial. Farther outward, it becomes increasingly close to perpendicular to the radius.\n\nIn differential geometry, the curvature measures how rapidly a curve changes direction per unit arc length. For the Archimedean spiral, its magnitude is\n\n\\[\\kappa= \\frac{r^2+2b^2}{(r^2+b^2)^{3/2}}.\\]\n\nFor \\(r=b\\theta\\), this becomes\n\n\\[\\kappa(\\theta)= \\frac{\\theta^2+2} {|b|(1+\\theta^2)^{3/2}}.\\]\n\nAt the pole, \\(\\kappa(0)=2/|b|\\). The curve is regular there: the Cartesian tangent vector is nonzero, even though the polar angle at the pole is not uniquely defined. Far from the pole, \\(\\kappa\\) is approximately \\(1/r\\), so a short portion of the spiral increasingly resembles an arc of a circle centered near the pole."
    },
    {
      "heading": "Arc length",
      "text": "The arc length between parameters \\(\\theta_1\\) and \\(\\theta_2\\), with \\(\\theta_2\\geq\\theta_1\\), is given by the integral\n\n\\[L= \\int_{\\theta_1}^{\\theta_2} \\sqrt{(a+b\\theta)^2+b^2}\\,d\\theta.\\]\n\nFor \\(b>0\\), set \\(u=(a+b\\theta)/b\\). Then\n\n\\[L= \\frac{b}{2} \\left[ u\\sqrt{1+u^2} + \\ln\\!\\left(u+\\sqrt{1+u^2}\\right) \\right]_{u_1}^{u_2}.\\]\n\nIn the standard case \\(r=b\\theta\\), with \\(b>0\\), the length from the pole to angle \\(\\Theta\\geq0\\) is\n\n\\[L(\\Theta)= \\frac{b}{2} \\left[ \\Theta\\sqrt{1+\\Theta^2} + \\ln\\!\\left(\\Theta+\\sqrt{1+\\Theta^2}\\right) \\right].\\]\n\nFor large \\(\\Theta\\), its leading growth is\n\n\\[L(\\Theta)\\sim\\frac{b\\Theta^2}{2}.\\]\n\nConsequently, equal-angle sampling becomes increasingly sparse when measured along the curve. Approximately equal arc-length spacing requires nonuniform angular steps."
    },
    {
      "heading": "Area and quadrature",
      "text": "The area swept out by the radius vector is\n\n\\[A= \\frac12 \\int_{\\theta_1}^{\\theta_2} r(\\theta)^2\\,d\\theta.\\]\n\nFor \\(r=a+b\\theta\\), with \\(b\\neq0\\),\n\n\\[A= \\frac{(a+b\\theta_2)^3-(a+b\\theta_1)^3}{6b}.\\]\n\nFor \\(r=b\\theta\\), from the pole to angle \\(\\Theta\\),\n\n\\[A=\\frac{b^2\\Theta^3}{6}.\\]\n\nWhen \\(0\\leq\\Theta\\leq2\\pi\\), this is the ordinary area enclosed by the spiral segment and its bounding radial segments. Over multiple revolutions, the same integral measures swept area with overlapping portions counted repeatedly; it is not generally the area of the union of all swept regions.\n\nAfter the first complete revolution, let \\(R=2\\pi b\\) be the final radius. The enclosed area is\n\n\\[A=\\frac{\\pi R^2}{3},\\]\n\none-third the area of the circle with radius \\(R\\). This is a central classical result associated with the spiral."
    },
    {
      "heading": "Historical significance",
      "text": "Archimedes studied the spiral in the third century BCE, defining it through the combination of uniform rotation and uniform motion along a rotating line. In On Spirals, he established results about tangents, areas, and successive revolutions without the symbolic methods of modern calculus.\n\nHis area arguments belong to the tradition of the method of exhaustion, which proves area relations by bounding figures with increasingly fine approximations. The spiral provided an important example of a curve defined by motion rather than solely by intersections of lines, circles, or cones.\n\nThe curve also has classical connections with angle division. For \\(r=b\\theta\\), dividing a radius into a given number of equal parts and locating the corresponding points on the first turn converts those radial divisions into equal angular divisions. Such constructions assume access to the spiral itself; they are not constructions using only an unmarked straightedge and compass."
    },
    {
      "heading": "Comparison with other spirals",
      "text": "The Archimedean spiral is distinguished by additive radial growth.\n\n- A logarithmic spiral has equation \\(r=ce^{k\\theta}\\). Equal angular increments multiply the radius by a constant factor, and the tangent makes a constant angle with the radial direction. Neither property holds for an Archimedean spiral.\n- A Fermat spiral has the standard form \\(r=c\\sqrt{\\theta}\\). Its squared radius, rather than its radius, grows linearly with angle.\n- A hyperbolic spiral has the form \\(r=c/\\theta\\), so its radius decreases as the positive angle increases.\n\nThese curves can be placed within the broader power-law family \\(r=c\\theta^q\\), of which the standard Archimedean spiral is the case \\(q=1\\). The term Archimedean spiral ordinarily refers to the linear-radius case, although broader terminology sometimes groups related power-law spirals under the same heading."
    },
    {
      "heading": "Applications and modeling limits",
      "text": "Constant radial pitch makes the curve useful wherever a rotating process must cover a plane with approximately uniform spacing between turns.\n\nSpiral scanning and tool paths. A scanner, plotting device, or machining tool can follow an Archimedean path to move continuously across a circular region. The radial pitch helps determine coverage, while controlling travel speed requires accounting for the increasing arc length per unit angle.\n\nSpiral antennas. Archimedean spiral geometries are used in planar antenna designs, including two-arm configurations. Their electromagnetic behavior depends on conductor width, spacing, feed arrangement, substrate, and finite size, not just the mathematical centerline.\n\nGrooves and winding patterns. A groove cut under constant rotation and constant radial feed follows an Archimedean spiral. Actual recording grooves may use variable pitch, while tightly wound strips with finite thickness generally approximate rather than exactly realize the ideal curve.\n\nMechanical motion conversion. A suitably constrained follower engaging an Archimedean spiral groove can convert uniform rotation into uniform radial displacement over a working interval. Finite follower size, contact geometry, and the need for a return stroke impose additional design constraints."
    }
  ],
  "links": [
    "geometry",
    "polar-coordinates",
    "archimedes",
    "radian",
    "circle",
    "cartesian-coordinate-system",
    "derivative",
    "differential-geometry",
    "arc-length",
    "integral",
    "calculus",
    "method-of-exhaustion"
  ],
  "sources": [],
  "license": "https://creativecommons.org/licenses/by/4.0/"
}