{
  "id": "angular-velocity",
  "title": "Angular Velocity",
  "lang": "en",
  "source_lang": "en",
  "summary": "Angular velocity describes the rate and direction of rotation of an object or of a position vector about a specified reference point or axis.",
  "category": "science",
  "subcategory": "physics",
  "type": "concept",
  "aliases": [
    "Rotational velocity"
  ],
  "generated_at": "2026-11-05",
  "model": "pro/gpt-6.1-sol",
  "url": "https://aiwiki.page/en/angular-velocity/",
  "translations": {
    "zh-Hans": {
      "url": "https://aiwiki.page/zh/angular-velocity/",
      "json": "https://aiwiki.page/zh/angular-velocity.json"
    }
  },
  "sections": [
    {
      "heading": "",
      "text": "Angular velocity is the rate at which an angular position or orientation changes with time. In classical mechanics, it describes both the motion of a particle around a reference point and the rotation of a rigid body. For motion in a fixed plane, it can be represented by a signed scalar; in three dimensions, the angular velocity of a rigid body is an axial vector whose direction specifies the instantaneous rotation axis and whose magnitude is the angular speed. Its usual symbol is \\(\\omega\\), or \\(\\boldsymbol{\\omega}\\) when its vector character is emphasized."
    },
    {
      "heading": "Definition and units",
      "text": "For motion about a fixed axis, let \\(\\theta(t)\\) denote an angular coordinate measured continuously rather than reduced to a single revolution. The average angular velocity over a time interval is\n\n\\[\\overline{\\omega}=\\frac{\\Delta\\theta}{\\Delta t}.\\]\n\nThe instantaneous angular velocity is the time derivative of that coordinate:\n\n\\[\\omega=\\frac{d\\theta}{dt}.\\]\n\nThe sign depends on the chosen positive direction of rotation. In a conventional Cartesian plane, counterclockwise rotation is positive when viewed from the positive side of the perpendicular axis.\n\nThe International System of Units expresses angular velocity in radians per second, written \\(\\mathrm{rad\\,s^{-1}}\\). Because a radian is a ratio of lengths, angular velocity has the dimension of inverse time. Nevertheless, retaining “rad” makes clear that the quantity is an angular rate rather than a number of cycles per unit time.\n\nOther common units include degrees per second and revolutions per minute, abbreviated rpm. If \\(N\\) is the numerical value of a rotation rate in rpm,\n\n\\[\\omega=\\frac{2\\pi N}{60}\\ \\mathrm{rad\\,s^{-1}}.\\]\n\nThus, a shaft rotating at \\(60\\ \\mathrm{rpm}\\) has an angular speed of \\(2\\pi\\ \\mathrm{rad\\,s^{-1}}\\).\n\nAngular speed and angular frequency\n\nAngular speed is the nonnegative magnitude of angular velocity:\n\n\\[\\text{angular speed}=|\\boldsymbol{\\omega}|.\\]\n\nFor uniform rotation with period \\(T\\) and rotational frequency \\(f=1/T\\),\n\n\\[|\\boldsymbol{\\omega}|=2\\pi f=\\frac{2\\pi}{T}.\\]\n\nAngular frequency uses the same unit and is also commonly denoted by \\(\\omega\\), but the concepts are not identical. Angular frequency can describe the rate of phase change of an oscillation or wave even when no physical object rotates."
    },
    {
      "heading": "Direction and three-dimensional rotation",
      "text": "The angular-velocity vector follows the right-hand rule: curling the fingers of the right hand in the direction of rotation makes the extended thumb point along \\(\\boldsymbol{\\omega}\\). A wheel rotating counterclockwise as seen by an observer therefore has an angular-velocity vector pointing toward that observer.\n\nAngular velocity is an axial vector, also called a pseudovector. It transforms like an ordinary vector under proper spatial rotations, but differently under reflections. This distinction follows from its relation to the vector cross product.\n\nFor a rigid body, all points share the same instantaneous angular-velocity vector, even though their linear velocities generally differ. If \\(O\\) is a point fixed in the body and \\(\\mathbf r\\) is the position of another body point \\(P\\) relative to \\(O\\), then\n\n\\[\\mathbf v_P=\\mathbf v_O+\\boldsymbol{\\omega}\\times\\mathbf r.\\]\n\nThe first term represents the motion of the reference point; the second gives the velocity relative to that point due to rotation. The reference point need not be stationary in space.\n\nFor pure rotation about a fixed axis, the speed of a point at perpendicular distance \\(r_\\perp\\) from the axis is\n\n\\[v=|\\boldsymbol{\\omega}|r_\\perp.\\]\n\nPoints farther from the axis move faster, while points on the axis have zero velocity due to rotation.\n\nWhy a finite angle is not generally a vector\n\nInfinitesimal rotations can be combined through vector addition to first order, making angular velocity a vector quantity. Finite rotations, however, generally depend on the order in which they are performed. Rotating an object about one axis and then another usually produces a different orientation from performing those rotations in reverse order.\n\nConsequently, the angular-velocity vector is not generally the time derivative of a three-component “rotation-angle vector.” Nor are its Cartesian components simply the derivatives of three orientation angles.\n\nA precise formulation uses a rotation matrix \\(R(t)\\) that maps body-fixed coordinates into spatial coordinates:\n\n\\[[\\boldsymbol{\\omega}]_\\times=\\dot R R^{\\mathsf T},\\]\n\nwhere the skew-symmetric matrix \\([\\boldsymbol{\\omega}]_\\times\\) is defined by\n\n\\[[\\boldsymbol{\\omega}]_\\times\\mathbf a =\\boldsymbol{\\omega}\\times\\mathbf a\\]\n\nfor any vector \\(\\mathbf a\\). This expression gives angular velocity in spatial coordinates; \\(R^{\\mathsf T}\\dot R\\) gives its representation in body-fixed coordinates."
    },
    {
      "heading": "Angular velocity of a particle",
      "text": "A particle need not follow a circle to have an angular velocity about a chosen origin. In planar motion, with position \\(\\mathbf r=(x,y)\\), the angular rate of its position vector is\n\n\\[\\dot\\theta=\\frac{x\\dot y-y\\dot x}{x^2+y^2},\\]\n\nprovided the particle is not at the origin. Radial motion changes the distance from the origin without directly changing this angle.\n\nIn three dimensions, a useful angular-velocity vector for the direction of a particle’s position vector is\n\n\\[\\boldsymbol{\\omega}_{\\perp} =\\frac{\\mathbf r\\times\\mathbf v}{r^2}.\\]\n\nIt describes the instantaneous turning of the line from the origin to the particle. It does not, by itself, describe rotation of the particle about its own axis.\n\nThere is an important nonuniqueness: adding any component parallel to \\(\\mathbf r\\) does not change \\(\\boldsymbol{\\omega}\\times\\mathbf r\\). The expression above selects the component perpendicular to \\(\\mathbf r\\). The origin must therefore be specified, and a single particle’s motion does not determine a unique full three-dimensional rotation of a body."
    },
    {
      "heading": "Angular acceleration and linear acceleration",
      "text": "Angular acceleration is the rate of change of angular velocity:\n\n\\[\\boldsymbol{\\alpha} =\\frac{d\\boldsymbol{\\omega}}{dt}.\\]\n\nIts SI unit is \\(\\mathrm{rad\\,s^{-2}}\\). Angular acceleration can result from a change in angular speed, a change in the direction of the rotation axis, or both.\n\nFor rotation about a fixed axis with constant signed angular acceleration,\n\n\\[\\omega=\\omega_0+\\alpha t,\\]\n\n\\[\\theta-\\theta_0=\\omega_0t+\\frac12\\alpha t^2.\\]\n\nFor two points fixed in a rigid body, their accelerations satisfy\n\n\\[\\mathbf a_P =\\mathbf a_O +\\boldsymbol{\\alpha}\\times\\mathbf r +\\boldsymbol{\\omega}\\times (\\boldsymbol{\\omega}\\times\\mathbf r).\\]\n\nThe second term is the acceleration associated with changing angular velocity. The third is the inward, or centripetal, contribution. In fixed-axis rotation, their magnitudes are respectively\n\n\\[a_{\\mathrm t}=|\\alpha|r_\\perp, \\qquad a_{\\mathrm c}=\\omega^2r_\\perp.\\]\n\nConstant angular velocity therefore does not imply zero linear acceleration: a point moving around a circle continually changes its direction of motion."
    },
    {
      "heading": "Relation to rotational dynamics",
      "text": "Angular velocity describes motion; it is not itself a measure of the cause of that motion. Its relation to angular momentum depends on how mass is distributed.\n\nFor a rigid body rotating about its center of mass,\n\n\\[\\mathbf L=\\mathbf I\\boldsymbol{\\omega},\\]\n\nwhere \\(\\mathbf I\\) is the inertia tensor. In general, \\(\\mathbf L\\) and \\(\\boldsymbol{\\omega}\\) are not parallel. They are parallel when rotation occurs about a principal axis of inertia.\n\nThe rotational contribution to kinetic energy is\n\n\\[K_{\\mathrm{rot}} =\\frac12\\boldsymbol{\\omega}\\cdot \\mathbf I\\boldsymbol{\\omega}.\\]\n\nFor fixed-axis rotation, this reduces to\n\n\\[K_{\\mathrm{rot}}=\\frac12 I\\omega^2,\\]\n\nwhere \\(I\\) is the moment of inertia about that axis.\n\nThe corresponding external torque and angular momentum, evaluated about the same stationary origin in an inertial reference frame, obey\n\n\\[\\boldsymbol{\\tau}_{\\mathrm{ext}} =\\frac{d\\mathbf L}{dt}.\\]\n\nThe familiar scalar equation \\(\\tau=I\\alpha\\) applies to the component along a fixed axis when the moment of inertia about that axis is constant. It is not the general vector equation for arbitrary three-dimensional rotation. A torque-free asymmetric rigid body can change the direction of its angular velocity even while its angular momentum remains constant."
    },
    {
      "heading": "Reference frames and rotating systems",
      "text": "Angular velocity must be specified relative to a reference frame. An object stationary relative to the surface of Earth generally has nonzero angular velocity relative to an approximately inertial astronomical frame.\n\nIf frame \\(B\\) rotates relative to frame \\(A\\), angular velocities combine instantaneously as\n\n\\[\\boldsymbol{\\omega}_{\\text{body}/A} = \\boldsymbol{\\omega}_{\\text{body}/B} + \\boldsymbol{\\omega}_{B/A},\\]\n\nprovided all vectors are expressed in the same coordinate basis.\n\nFor any vector \\(\\mathbf A\\), its derivatives in inertial and rotating frames are related by\n\n\\[\\left(\\frac{d\\mathbf A}{dt}\\right)_{\\mathrm{inertial}} = \\left(\\frac{d\\mathbf A}{dt}\\right)_{\\mathrm{rotating}} +\\boldsymbol{\\Omega}\\times\\mathbf A,\\]\n\nwhere \\(\\boldsymbol{\\Omega}\\) is the rotating frame’s angular velocity. This relation underlies the centrifugal and Coriolis terms used in rotating machinery, atmospheric dynamics, and ocean circulation."
    },
    {
      "heading": "Measurement and applications",
      "text": "Angular velocity is measured directly by gyroscopes and inferred from devices such as rotary encoders, tachometers, and optical tracking systems. An encoder measures angular position or counts angular increments; angular velocity is then estimated from the change over a measured time interval. A tachometer commonly reports rotational speed in rpm.\n\nMeasurement quality depends on timing accuracy, angular resolution, alignment, and the method used to process the signal. Differentiating noisy angle measurements can amplify high-frequency noise. Sampling can also make rapid rotation appear slower, stationary, or reversed, an effect known as aliasing. These factors contribute to measurement uncertainty.\n\nApplications include motor control, turbine monitoring, vehicle navigation, robotic orientation, and spacecraft attitude determination. In fluid mechanics, local rotation is related to vorticity, defined by\n\n\\[\\boldsymbol{\\zeta}=\\nabla\\times\\mathbf v.\\]\n\nThe local angular velocity associated with the antisymmetric part of the velocity gradient is \\(\\boldsymbol{\\zeta}/2\\). This does not mean that every fluid element rotates as an undeformed rigid body: fluid motion can also include stretching and shear."
    }
  ],
  "links": [
    "classical-mechanics",
    "rigid-body",
    "derivative",
    "international-system-of-units",
    "radian",
    "second",
    "angular-frequency",
    "matrix",
    "angular-acceleration",
    "angular-momentum",
    "mass",
    "center-of-mass",
    "moment-of-inertia",
    "kinetic-energy",
    "torque",
    "inertial-reference-frame",
    "earth",
    "coriolis-effect",
    "gyroscope",
    "measurement-uncertainty"
  ],
  "sources": [],
  "license": "https://creativecommons.org/licenses/by/4.0/"
}