{
  "id": "ammeter",
  "title": "Ammeter",
  "lang": "en",
  "source_lang": "en",
  "summary": "An ammeter measures electric current, using methods such as magnetic deflection, voltage measurement across a resistance, or sensing the magnetic field around a conductor.",
  "category": "science",
  "subcategory": "physics",
  "type": "concept",
  "aliases": [
    "Ampere meter"
  ],
  "generated_at": "2026-11-03",
  "model": "pro/gpt-6.1-sol",
  "url": "https://aiwiki.page/en/ammeter/",
  "translations": {
    "zh-Hans": {
      "url": "https://aiwiki.page/zh/ammeter/",
      "json": "https://aiwiki.page/zh/ammeter.json"
    }
  },
  "sections": [
    {
      "heading": "",
      "text": "An ammeter is an instrument for measuring electric current, usually expressed in amperes (A). Ammeters range from sensitive laboratory instruments measuring very small currents to industrial meters monitoring currents of thousands of amperes through external sensors. A conventional ammeter is connected in series with the circuit branch being measured, whereas magnetic-sensing instruments can measure current without an electrically conducting connection to that branch. An ammeter may be a separate instrument, a panel-mounted indicator, or a function of a multimeter."
    },
    {
      "heading": "Measurement principle and circuit connection",
      "text": "Electric current is the rate at which electric charge passes a point:\n\n\\[I=\\frac{dQ}{dt},\\]\n\nwhere \\(I\\) is current, \\(Q\\) is charge, and \\(t\\) is time. Most ammeters do not directly count charge carriers. Instead, they measure an effect of current, such as magnetic force, a voltage drop, or heating, and convert that effect into a current indication.\n\nA directly connected ammeter is placed in series so that the current of interest passes through its input circuit. Its effective electrical resistance should be small relative to the resistance of the circuit being measured. An ideal series ammeter has zero resistance and therefore does not change the current.\n\nThis contrasts with a voltmeter, which measures the difference in electric potential between two points and is connected in parallel. A voltmeter ideally has infinite input resistance.\n\nBurden voltage and loading\n\nA real ammeter introduces a voltage drop, commonly called its burden voltage. For an approximately resistive input,\n\n\\[V_b=IR_A,\\]\n\nwhere \\(R_A\\) is the effective resistance of the ammeter, including relevant internal connections and protection components.\n\nThis voltage drop changes the circuit under test. For a voltage source \\(V\\) driving a resistance \\(R\\), the current without the meter is\n\n\\[I_0=\\frac{V}{R},\\]\n\nwhereas insertion of the ammeter gives\n\n\\[I_m=\\frac{V}{R+R_A}.\\]\n\nThe resulting loading error can be significant in low-voltage circuits or on sensitive current ranges. For alternating current (AC), the meter’s impedance, rather than resistance alone, may determine its influence.\n\nA conventional low-resistance current input connected directly across a voltage source can create a short circuit. Instrument protection therefore involves more than selecting a suitable measurement range: input fuses, insulation, terminal design, and ratings for the electrical environment also matter."
    },
    {
      "heading": "Main types",
      "text": "Permanent-magnet moving-coil ammeters\n\nA permanent-magnet moving-coil instrument contains a light coil suspended in a magnetic field. Current through the coil produces a turning effect, while springs supply an opposing restoring torque. In a suitable radial magnetic field,\n\n\\[\\tau=NBAI,\\]\n\nwhere \\(N\\) is the number of coil turns, \\(B\\) is magnetic flux density, and \\(A\\) is the coil area. If the spring torque is proportional to angular displacement, pointer deflection is proportional to current.\n\nThe basic movement is sensitive and ordinarily measures direct current (DC). Reversing the current reverses the direction of deflection. An alternating current produces no sustained deflection proportional to its magnitude unless it is rectified or otherwise converted.\n\nMoving-coil ammeters are related to the galvanometer, a sensitive instrument for detecting and measuring small currents.\n\nShunt ammeters\n\nA sensitive movement can measure a much larger current when a low-resistance shunt is connected in parallel with it. Most of the current flows through the shunt; only a known fraction passes through the movement.\n\nIf the movement has resistance \\(R_m\\) and full-scale current \\(I_m\\), the shunt resistance needed for a total full-scale current \\(I\\) is\n\n\\[R_s=\\frac{I_mR_m}{I-I_m}.\\]\n\nElectronic ammeters also commonly use shunts, measuring their voltage drop and calculating current through Ohm’s law:\n\n\\[I=\\frac{V_s}{R_s}.\\]\n\nPrecision shunts often have separate current and voltage terminals. This four-terminal arrangement reduces errors caused by voltage drops in leads and contacts. Shunt heating, governed approximately by Joule heating as \\(P=I^2R_s\\), limits continuous current and can change resistance through temperature rise.\n\nMoving-iron ammeters\n\nMoving-iron instruments use a current-carrying coil to magnetize soft iron. Attraction of an iron piece into the coil, or repulsion between magnetized pieces, moves the pointer.\n\nThe driving torque is approximately proportional to the square of current under simplified operating conditions. It therefore acts in the same direction for either current polarity, allowing measurement of both AC and DC. The scale is generally nonlinear.\n\nPractical errors arise from magnetic hysteresis, frequency-dependent effects, waveform distortion, and external magnetic fields. Although the operating principle responds to mean-square current, accurate indication over arbitrary waveforms and frequencies is not guaranteed.\n\nElectrodynamic and thermal instruments\n\nAn electrodynamic ammeter uses interacting magnetic fields from fixed and moving coils. When both carry the measured current, the average torque depends approximately on the mean square of that current. Such instruments can operate on AC or DC, although their impedance and frequency response limit performance.\n\nThermal ammeters infer current from heating. Hot-wire instruments measure thermal expansion, while thermocouple instruments measure the temperature rise produced by current in a heater. Thermal methods can measure effective current at frequencies beyond the useful range of many mechanical movements, but have finite response times, overload limits, and frequency-dependent errors.\n\nDigital ammeters\n\nA digital ammeter commonly measures the voltage across an internal or external shunt, conditions that signal, and converts it into numerical form using an analog-to-digital converter. Its electronics may provide automatic range selection, averaging, data logging, and communication with control systems.\n\nAt very low currents, instruments often use a feedback amplifier that converts input current into an output voltage while keeping the input close to a reference potential. Such designs can achieve much lower burden voltage than a simple passive shunt. Leakage currents, input bias currents, electrical noise, and contamination become important limitations at these levels.\n\nA digital display does not by itself identify the sensing method or guarantee accuracy. Digital instruments may use resistive, magnetic, or thermal sensors."
    },
    {
      "heading": "Magnetic and non-contact measurement",
      "text": "Current produces a magnetic field around a conductor. Several instruments use this field to measure current without placing a resistive element directly in its path.\n\nA current transformer uses electromagnetic induction to produce a secondary current related to the primary current. It is widely used for AC measurement in power systems. It does not measure steady DC, and accuracy is limited by core saturation, frequency, and burden on the secondary circuit. An open secondary on an energized conventional current transformer can develop hazardous voltages.\n\nA Hall-effect sensor responds to magnetic field and can measure both AC and DC. Hall-based meters may use open-loop sensing or a feedback arrangement that balances the magnetic field. Offset, temperature drift, external fields, and conductor position can affect their readings.\n\nA Rogowski coil produces a voltage proportional to the rate of change of current. Integration of this signal yields a representation of the current waveform. Its air core avoids ferromagnetic core saturation, but it cannot measure steady DC.\n\nA clamp meter packages a magnetic sensor in jaws or a flexible loop placed around a conductor. Its sensing principle determines whether it measures AC only or both AC and DC. When a clamp encloses both outgoing and return conductors, their fields largely cancel; this arrangement is useful for measuring residual or leakage current rather than the full load current."
    },
    {
      "heading": "AC readings and waveform dependence",
      "text": "For a periodic current, the root-mean-square value is\n\n\\[I_{\\mathrm{rms}} = \\sqrt{\\frac{1}{T}\\int_0^T i^2(t)\\,dt}.\\]\n\nRMS current determines the average heating produced in a constant resistance. For a sinusoidal current,\n\n\\[I_{\\mathrm{rms}}=\\frac{I_{\\mathrm{peak}}}{\\sqrt{2}}.\\]\n\nSome AC ammeters rectify the input and measure its average magnitude, then apply a scale factor that gives the correct RMS value for a sine wave. These average-responding, RMS-calibrated meters can give incorrect readings for distorted or pulsed currents.\n\nTrue-RMS instruments determine RMS more directly, but still have limits on frequency, crest factor, signal amplitude, and peak input. Specifications also distinguish AC-only measurements, which exclude the DC component, from AC-plus-DC measurements."
    },
    {
      "heading": "Accuracy and calibration",
      "text": "A current reading is accompanied by measurement uncertainty. Important influences include:\n\n- sensor tolerance, drift, and temperature dependence;\n- burden voltage and circuit loading;\n- lead and contact resistance;\n- bandwidth and waveform response;\n- noise, zero offset, and display resolution;\n- magnetic interference, sensor positioning, and core saturation.\n\nDigital accuracy specifications often combine a percentage of the reading with an allowance expressed in display counts. Analog accuracy may instead be specified relative to full scale. Consequently, the same instrument can have very different relative errors at different points on its range.\n\nCalibration establishes the relationship between an instrument’s indication and reference values under specified conditions. Current calibration may use a reference current source or a calibrated resistance together with a voltage measurement. Metrological traceability connects the result to recognized references through a documented chain of calibrations."
    },
    {
      "heading": "Historical development and applications",
      "text": "Practical current measurement developed from nineteenth-century studies of the magnetic effects of electricity. Early galvanometers used the deflection of magnetic needles; later moving-coil instruments offered more uniform scales and greater sensitivity. Shunts extended measurement to larger currents, while moving-iron, electrodynamic, and thermal designs supported AC measurement. Electronic amplification, digital conversion, and magnetic sensors subsequently expanded usable ranges and enabled automated recording.\n\nAmmeters are used in electronics testing, battery systems, industrial machinery, laboratory research, and electrical grids. The appropriate instrument depends on current magnitude, waveform, frequency, required isolation, permissible circuit disturbance, and environmental conditions. Instruments designed for steady current may miss brief pulses, while sensors capable of recording fast transients may require separate processing to report an average or RMS value."
    }
  ],
  "links": [
    "electric-current",
    "ampere",
    "electric-charge",
    "electrical-resistance",
    "voltmeter",
    "electric-potential",
    "alternating-current",
    "electrical-impedance",
    "magnetic-field",
    "direct-current",
    "ohms-law",
    "joule-heating",
    "current-transformer",
    "electromagnetic-induction",
    "hall-effect",
    "rogowski-coil",
    "measurement-uncertainty",
    "calibration",
    "metrological-traceability",
    "electrical-grid"
  ],
  "sources": [],
  "license": "https://creativecommons.org/licenses/by/4.0/"
}