{
  "id": "altimeter",
  "title": "Altimeter",
  "lang": "en",
  "source_lang": "en",
  "summary": "An altimeter measures height relative to a reference level, using atmospheric pressure, reflected radio or laser signals, or satellite-derived positioning.",
  "category": "technology",
  "subcategory": "transport",
  "type": "concept",
  "aliases": [
    "Altitude meter",
    "height meter"
  ],
  "generated_at": "2026-11-05",
  "model": "pro/gpt-6.1-sol",
  "url": "https://aiwiki.page/en/altimeter/",
  "translations": {
    "zh-Hans": {
      "url": "https://aiwiki.page/zh/altimeter/",
      "json": "https://aiwiki.page/zh/altimeter.json"
    }
  },
  "sections": [
    {
      "heading": "",
      "text": "An altimeter is an instrument that measures vertical position relative to a specified reference, such as mean sea level, a mathematical model of Earth, or the surface directly below it. Altimeters are used in aviation, spacecraft, surveying, outdoor navigation, and remote sensing. Their operating principles vary: barometric altimeters infer altitude from atmospheric pressure, radar and laser altimeters measure distance to a reflecting surface, and satellite-navigation systems calculate height from positioning signals. These measurements are not interchangeable unless their reference levels and physical meanings are taken into account."
    },
    {
      "heading": "Altitude and reference levels",
      "text": "An altitude measurement is incomplete without a defined reference. Common reference systems include:\n\n- Mean-sea-level altitude: vertical position relative to a sea-level-related datum, widely used in aviation and mapping.\n- Height above ground level: vertical separation from the local terrain or another underlying surface.\n- Ellipsoidal height: height relative to a mathematical reference ellipsoid used in satellite positioning.\n- Pressure altitude: altitude corresponding to a measured pressure in a standard atmospheric model, referenced to a pressure of 1,013.25 hectopascals.\n\nThe geoid is an equipotential surface of Earth’s gravity field that approximates global mean sea level. It differs from the smooth ellipsoid used in satellite positioning. Consequently, a satellite receiver’s ellipsoidal height can differ substantially from an elevation shown on a map.\n\nA commonly used relationship is\n\n\\[h = H + N,\\]\n\nwhere \\(h\\) is ellipsoidal height, \\(H\\) is orthometric height above the geoid, and \\(N\\) is geoid height relative to the reference ellipsoid. This conversion requires a suitable geoid model and compatible reference systems.\n\nA radar altimeter, by contrast, measures range to reflecting terrain or water. It does not independently determine elevation above sea level."
    },
    {
      "heading": "Barometric altimeters",
      "text": "Operating principle\n\nA barometric altimeter uses the decrease of atmospheric pressure with increasing altitude. It is essentially a sensitive barometer whose output is expressed as height.\n\nTraditional aircraft instruments contain sealed, partially evacuated aneroid capsules. As surrounding static pressure decreases, the capsules expand; mechanical linkages move pointers across a calibrated dial. Electronic instruments use pressure sensors and calculate altitude digitally. Compact devices frequently employ microelectromechanical systems.\n\nThe pressure–height relationship follows hydrostatic balance:\n\n\\[\\frac{dp}{dz}=-\\rho g,\\]\n\nwhere \\(p\\) is pressure, \\(z\\) is height, \\(\\rho\\) is air density, and \\(g\\) is gravitational acceleration.\n\nCombining this relationship with the ideal-gas law gives the hypsometric equation:\n\n\\[z_2-z_1= \\frac{R_d\\overline{T_v}}{g} \\ln\\left(\\frac{p_1}{p_2}\\right),\\]\n\nwhere \\(R_d\\) is the specific gas constant for dry air and \\(\\overline{T_v}\\) is the layer’s mean virtual temperature, which accounts for the effect of water vapour on air density. This expression assumes approximately constant gravitational acceleration over the layer.\n\nAn operational altimeter generally does not measure the temperature of the entire atmospheric column. Instead, it converts pressure into altitude using a prescribed atmospheric model, commonly based on the International Standard Atmosphere. Its indication therefore depends on both the pressure reference and the difference between actual and assumed atmospheric conditions.\n\nAviation pressure settings\n\nAircraft barometric altimeters normally include an adjustable pressure reference. Important settings are:\n\nSetting | Meaning\nQNH | A sea-level pressure setting derived so that the altimeter indicates aerodrome elevation when on the aerodrome, subject to instrument and system errors.\nQFE | Pressure at a specified aerodrome reference level; the altimeter indicates approximately zero at that level.\nStandard pressure | A setting of 1,013.25 hPa, approximately 29.92 inches of mercury, used for pressure altitude and flight levels.\n\nA flight level is a pressure surface identified by its nominal altitude in hundreds of feet under the standard setting. Flight level 350, for example, corresponds to an indicated pressure altitude of 35,000 feet, not necessarily a true height of 35,000 feet above sea level.\n\nUsing a common pressure reference allows aircraft and air traffic control to work within a consistent vertical system. The transition between local pressure settings and standard pressure is governed by regional procedures; transition altitude is not identical worldwide.\n\nErrors and limitations\n\nBarometric altitude is affected by several distinct factors:\n\n- Changing atmospheric pressure: an instrument at a fixed location can indicate a height change as weather changes.\n- Nonstandard temperature: pressure surfaces are closer together in colder air. Above a reference location, true height can therefore be lower than indicated when the atmosphere is colder than the calibration model assumes.\n- Static-source error: airflow around an aircraft can cause pressure at the static port to differ from undisturbed ambient pressure.\n- Instrument error and lag: capsule behaviour, friction, sensor characteristics, and pneumatic response can affect the indication.\n- Blocked or leaking pressure lines: faults in an aircraft’s static system can produce misleading or unresponsive readings.\n\nNear sea level, a pressure difference of 1 hPa corresponds to roughly 8 metres, or 27 feet, of indicated altitude. This is only a local approximation: the pressure change per unit height decreases with altitude.\n\nHigh display resolution does not necessarily imply high accuracy. A digital device may resolve small pressure changes while still having substantial absolute altitude error because of its reference setting or atmospheric assumptions."
    },
    {
      "heading": "Radar altimeters",
      "text": "A radar altimeter, also called a radio altimeter, uses radar to measure distance to the surface below an aircraft or spacecraft. It transmits radio energy and analyses the returned echo.\n\nFor a pulsed system, range is obtained from round-trip travel time:\n\n\\[R=\\frac{c\\Delta t}{2},\\]\n\nwhere \\(R\\) is range, \\(c\\) is the speed of light, and \\(\\Delta t\\) is the time between transmission and reception.\n\nMany aircraft radio altimeters use frequency-modulated continuous-wave radar. Their transmitted frequency changes in a known pattern, and the frequency difference between the transmitted and delayed received signals is used to determine range.\n\nRadio altimeters provide local surface-clearance information, particularly during approach, landing, and low-level operations. Their outputs can feed automatic landing equipment, height callouts, and terrain awareness and warning systems.\n\nTheir indications depend on antenna orientation, aircraft attitude, terrain geometry, surface reflectivity, and the processing of echoes from within the illuminated footprint. Over sloping or irregular terrain, the measured range need not equal the vertical distance to the point directly beneath the aircraft. Radio-frequency interference can also affect performance."
    },
    {
      "heading": "Laser altimeters",
      "text": "A laser altimeter measures distance using pulses of laser light or another optical ranging technique. It is a form of lidar. Pulsed instruments use the same basic round-trip time relationship as pulsed radar.\n\nLaser systems can produce small surface footprints and precise range measurements. Airborne instruments map terrain, vegetation, ice, and infrastructure, while spacecraft instruments measure planetary topography and changes in ice-sheet elevation.\n\nOptical ranging has limitations distinct from those of radar. Clouds, aerosols, and precipitation can attenuate or obscure the signal. Surface reflectance and slope influence the returned pulse, and vegetation can produce multiple returns from branches, foliage, and the ground. Accurate mapping also requires precise knowledge of instrument position and orientation."
    },
    {
      "heading": "Satellite-navigation altitude",
      "text": "A receiver using the Global Positioning System or another satellite-navigation constellation can calculate three-dimensional position, including ellipsoidal height. Although such a receiver is not a barometric altimeter, it can supply altitude to an integrated navigation display.\n\nSatellite-derived height does not require a local atmospheric pressure setting. However, its accuracy depends on satellite geometry, signal obstruction, multipath reflections, atmospheric propagation effects, receiver quality, and the availability of correction services. Vertical positioning uncertainty is often greater than horizontal uncertainty because of the geometry of the observations.\n\nSome receivers apply a geoid model to display an approximate mean-sea-level elevation. Others report ellipsoidal height directly. Data from different devices can therefore disagree even when both systems are functioning correctly."
    },
    {
      "heading": "Integrated instruments and measurement quality",
      "text": "Modern aircraft, drones, watches, and mobile devices often combine several measurement sources through sensor fusion. A barometric sensor can provide smooth, sensitive measurements of relative height change, while satellite positioning can help constrain longer-term drift. An inertial navigation system supplies motion estimates, and radar or laser ranging can provide direct surface-distance measurements.\n\nThese sources complement one another but measure different quantities. A barometer responds to pressure, satellite positioning estimates coordinates, and a downward-looking rangefinder measures distance to a reflecting surface. Combining them requires appropriate models, timing, reference conversions, and fault detection.\n\nCalibration establishes the relationship between an instrument’s output and known reference values. In pressure instruments, this can involve comparison with traceable pressure standards; in ranging systems, timing delays and internal path lengths must be characterised. Total measurement uncertainty also includes environmental effects, platform position and attitude, and uncertainty in the vertical datum."
    },
    {
      "heading": "Development and applications",
      "text": "Barometric altimetry developed from the recognition in the seventeenth century that atmospheric pressure decreases with elevation. Mercury barometers were used to compare heights before portable aneroid instruments became available in the nineteenth century. Aviation drove the development of more sensitive, adjustable, and readable instruments during the twentieth century, followed by electronic air-data systems.\n\nRadio altimetry expanded the ability to measure surface clearance without relying on atmospheric pressure. Later satellite radar and laser instruments extended altimetry to global ocean observations, ice-sheet monitoring, and planetary exploration.\n\nApplications now include:\n\n- Aviation: vertical navigation, altitude keeping, approach and landing systems, and terrain-clearance functions.\n- Outdoor navigation: estimates of elevation, accumulated ascent, and descent.\n- Surveying and mapping: elevation measurement and terrain modelling.\n- Oceanography: satellite radar measurements of sea-surface height, supporting research on ocean circulation and sea-level rise.\n- Cryosphere research: measurement of glacier and ice-sheet surface elevation changes.\n- Space exploration: surface mapping and distance measurement during descent and landing.\n\nIn satellite ocean altimetry, measured range alone is insufficient to determine sea-surface height. Processing combines the range with precise satellite orbit information and corrections for atmospheric propagation, tides, and the interaction of the radar pulse with waves. The distinction between raw range and geophysically referenced height is central to interpreting these observations."
    }
  ],
  "links": [
    "remote-sensing",
    "pressure",
    "sensor",
    "density",
    "air-traffic-control",
    "radar",
    "speed-of-light",
    "frequency-modulated-continuous-wave-radar",
    "laser",
    "lidar",
    "global-positioning-system",
    "sensor-fusion",
    "calibration",
    "measurement-uncertainty",
    "sea-level-rise"
  ],
  "sources": [],
  "license": "https://creativecommons.org/licenses/by/4.0/"
}