{
  "id": "additional-tier-one",
  "title": "Additional Tier 1",
  "lang": "en",
  "source_lang": "en",
  "summary": "Additional Tier 1 is a category of bank regulatory capital comprising perpetual instruments designed to absorb losses through cancelled distributions, principal write-downs, or conversion into equity.",
  "category": "economics",
  "subcategory": "finance",
  "type": "concept",
  "aliases": [
    "AT1",
    "Additional Tier 1 capital",
    "AT1 capital"
  ],
  "generated_at": "2026-11-04",
  "model": "pro/gpt-6.1-sol",
  "url": "https://aiwiki.page/en/additional-tier-one/",
  "translations": {
    "zh-Hans": {
      "url": "https://aiwiki.page/zh/additional-tier-one/",
      "json": "https://aiwiki.page/zh/additional-tier-one.json"
    }
  },
  "sections": [
    {
      "heading": "",
      "text": "Additional Tier 1 (AT1) is a category of bank regulatory capital consisting of qualifying instruments that are perpetual, deeply subordinated, and capable of absorbing losses while a bank remains in operation. Under Basel III, AT1 and Common Equity Tier 1 (CET1) together constitute Tier 1 capital. AT1 instruments commonly take the form of perpetual securities with discretionary, non-cumulative distributions and provisions allowing their principal to be written down or converted into common equity. Although often called AT1 bonds, they do not offer the payment and repayment protections associated with ordinary bank debt."
    },
    {
      "heading": "Place in the regulatory capital framework",
      "text": "The Basel Committee on Banking Supervision distinguishes capital according to its quality and capacity to absorb losses:\n\nCapital category | Main characteristics\nCommon Equity Tier 1 | Primarily common shares and qualifying reserves, including retained earnings, after regulatory adjustments; the highest-quality regulatory capital\nAdditional Tier 1 | Qualifying perpetual instruments with fully discretionary distributions and contractual or statutory loss-absorption features\n[[tier-two-capital | Tier 2 capital]]\n\nThe basic relationships are:\n\n\\[\\text{Tier 1 capital}=\\text{CET1}+\\text{AT1}\\]\n\n\\[\\text{Total regulatory capital}=\\text{CET1}+\\text{AT1}+\\text{Tier 2}.\\]\n\nUnder the Basel III baseline risk-based requirements, CET1 must equal at least 4.5% of risk-weighted assets, Tier 1 at least 6%, and total capital at least 8%. These requirements operate alongside capital buffers and any additional supervisory requirements.\n\nThere is no universal Basel requirement that a bank issue AT1 equal to 1.5% of risk-weighted assets. That figure is the difference between the baseline Tier 1 and CET1 minimum ratios. A bank can instead satisfy the entire Tier 1 requirement with CET1. AT1 cannot substitute for CET1 where a requirement specifically calls for common equity, including the capital conservation buffer.\n\nAT1 can also contribute to the numerator of the Basel III leverage ratio, which uses Tier 1 capital rather than total regulatory capital."
    },
    {
      "heading": "Main qualifying features",
      "text": "Basel standards provide an international framework, but domestic legislation and individual instrument terms determine the detailed legal treatment.\n\nPermanence and restrictions on redemption\n\nAT1 instruments have no contractual maturity date. An issuer may have an option to redeem, or call, an instrument, ordinarily no earlier than five years after issuance and subject to supervisory approval. Limited exceptions can apply to specified tax or regulatory events.\n\nA first call date is not a repayment date. Investors have no general right to require redemption, and the issuer must not create an expectation that it will exercise the call. Basel eligibility criteria also prohibit interest-rate step-ups or other incentives to redeem.\n\nSupervisory approval generally depends on replacement with capital of equal or better quality on sustainable terms, or demonstration that the bank’s capital position would remain well above its minimum requirements after redemption.\n\nDiscretionary and non-cumulative distributions\n\nThe issuer must have full discretion to cancel distributions or coupon payments. Cancellation must not itself constitute an event of default, and the cancelled amount does not accumulate as an obligation to be paid later.\n\nPayments must come from distributable items. Applicable capital-buffer rules or supervisory restrictions may also constrain distributions, even when the bank has not reached a contractual principal-loss trigger.\n\nAT1 coupons therefore differ fundamentally from the contractual interest payments on an ordinary corporate bond. A stated coupon rate is not an unconditional promise of payment.\n\nDeep subordination\n\nAT1 instruments rank below depositors, general creditors, and the bank’s subordinated debt. They cannot be secured or supported by guarantees or other arrangements that improve their seniority.\n\nTheir precise ranking relative to common equity and other capital instruments depends on applicable law and contractual terms. An instrument’s ranking in liquidation must also be distinguished from provisions that permit write-down or conversion before liquidation.\n\nRegulatory capital versus accounting classification\n\nAn AT1 instrument may be classified as equity or as a financial liability under the applicable accounting framework. Its regulatory classification does not automatically determine how it appears on the issuer’s balance sheet.\n\nFor instruments classified as liabilities for accounting purposes, the Basel AT1 criteria require principal loss absorption through conversion into common shares or a write-down mechanism at a predefined trigger. The trigger must be set at a CET1 ratio of 5.125% or higher. National rules or individual contracts may specify higher triggers."
    },
    {
      "heading": "How loss absorption works",
      "text": "AT1 can absorb losses through several mechanisms. These mechanisms operate at different stages of financial distress and should not be treated as interchangeable.\n\nCancellation of distributions\n\nCancelling a coupon conserves resources within the bank without necessarily reducing the instrument’s principal. It may occur before the bank is considered non-viable and need not mean that principal conversion or write-down is imminent.\n\nContractual capital-ratio triggers\n\nSome instruments convert into common shares when a specified CET1 ratio is breached. Others provide for a principal write-down, which may be permanent or temporary, depending on their terms.\n\nFor an instrument with a 7% trigger, for example, a fall in the relevant CET1 ratio below 7% can activate the contractual loss-absorption mechanism even if the bank continues operating. The amount converted or written down, the applicable capital measurement, and any subsequent write-up provisions depend on the contract and regulatory framework.\n\nConversion exposes holders to the value of the shares received and may dilute existing shareholders. A write-down reduces the investor’s claim directly and may eliminate it entirely.\n\nAT1 instruments with conversion features overlap with the broader category of contingent convertible bonds, often called CoCos. The terms are not synonyms: some AT1 instruments use write-down rather than conversion, and not every contingent convertible qualifies as AT1.\n\nPoint-of-non-viability loss absorption\n\nBasel standards also require non-common-equity regulatory capital to be capable of absorbing losses at the point of non-viability. This may be achieved through contractual provisions or a qualifying statutory regime.\n\nA non-viability determination is not necessarily tied to a numerical capital ratio. It can involve a supervisory judgment that write-down, conversion, or public-sector capital support is necessary to prevent the bank from becoming non-viable.\n\nConsequently, an AT1 instrument can suffer losses even if its last published capital ratio was above its contractual numerical trigger. Published ratios also cannot fully capture a rapidly developing liquidity crisis.\n\nResolution powers\n\nUnder bank resolution regimes, authorities may have statutory powers to write down or convert eligible claims. These powers are distinct from contractual AT1 triggers, although their operation may overlap.\n\nThe ordering of losses, creditor safeguards, and treatment of shareholders depend on the jurisdiction and legal procedure. A contractual AT1 write-down outside ordinary liquidation should not be assumed to follow exactly the same sequence as distributions in an insolvency proceeding."
    },
    {
      "heading": "Illustrative capital calculation",
      "text": "Suppose a bank has:\n\n- Risk-weighted assets of 100 billion currency units;\n- CET1 of 10 billion;\n- Eligible AT1 of 2 billion;\n- Eligible Tier 2 of 3 billion.\n\nIts risk-based capital ratios are:\n\n\\[\\text{CET1 ratio}=\\frac{10}{100}=10\\%\\]\n\n\\[\\text{Tier 1 ratio}=\\frac{10+2}{100}=12\\%\\]\n\n\\[\\text{Total capital ratio}=\\frac{10+2+3}{100}=15\\%.\\]\n\nThe AT1 instruments raise the Tier 1 and total capital ratios, but do not increase the CET1 ratio merely by being issued. Subsequent conversion or write-down may affect CET1 through the relevant accounting and regulatory treatment.\n\nThese ratios alone do not establish whether the bank satisfies every requirement. Capital buffers, supervisory add-ons, leverage requirements, and the eligibility of individual instruments also matter."
    },
    {
      "heading": "Economic role and investment risks",
      "text": "For issuers, AT1 provides a way to raise qualifying Tier 1 capital without immediately issuing ordinary shares. Its relative cost depends on market conditions, tax treatment, investor demand, and the terms required to attract buyers.\n\nFor investors, the prospect of a higher yield compensates for risks that go beyond ordinary credit risk:\n\n- Coupon risk: distributions can be cancelled without an ordinary payment default.\n- Principal-loss risk: write-down or conversion can produce substantial or total losses.\n- Extension risk: an expected call may not occur, leaving the security outstanding indefinitely.\n- Interest-rate and reset risk: prices and future coupons can change with benchmark rates and reset terms.\n- Market-liquidity risk: selling during stress may be difficult or require a substantial discount.\n- Legal and regulatory risk: outcomes depend on contractual wording, national law, and supervisory powers.\n\nA yield calculated to an assumed first call date can therefore give an incomplete picture. AT1 is neither an ordinary fixed-maturity bond nor an insured deposit."
    },
    {
      "heading": "Historical development and the Credit Suisse episode",
      "text": "AT1 developed from earlier forms of hybrid Tier 1 capital. The global financial crisis exposed weaknesses in instruments that counted as capital but did not reliably absorb losses while banks continued operating. Basel III tightened requirements concerning permanence, distribution discretion, and loss absorption.\n\nA prominent application occurred in March 2023 during the emergency takeover of Credit Suisse by UBS. The Swiss Financial Market Supervisory Authority ordered the write-down of approximately CHF 16 billion of Credit Suisse AT1 instruments. Credit Suisse shareholders received consideration under the acquisition agreement, while the affected AT1 instruments were written down in full.\n\nThe episode highlighted the importance of distinguishing contractual viability-event provisions and emergency legal powers from ordinary liquidation ranking. It also demonstrated that AT1 securities issued in different jurisdictions are not legally interchangeable: their treatment depends on the specific instruments and governing framework."
    }
  ],
  "links": [
    "bank-capital",
    "basel-iii",
    "risk-weighted-assets",
    "leverage-ratio",
    "default-finance",
    "corporate-bond",
    "accounting",
    "balance-sheet",
    "liquidity-risk",
    "capital-adequacy-ratio",
    "cost-of-capital",
    "credit-risk",
    "global-financial-crisis"
  ],
  "sources": [],
  "license": "https://creativecommons.org/licenses/by/4.0/"
}